Before Use; Intended Use; Cleaning; Reissue - aidapt VG887D Usage And Maintenance Instructions

BEFORE USE


Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may
damage the surface of the product.

Check the product for any visible damage If you see any damage or suspect a fault, do not use
your product as it may compromise your safety, but contact your supplier for support.

INTENDED USE


The Contour Memory Foam Pillow has been designed to offer improved comfort to those who
need improved head support in bed.

CLEANING

Cover
The cover can be removed and washed at a low heat with similar colours
Foam Inner
Clean using a mild detergent with a slightly damp, soft cloth only. Only use a mild detergent or
disinfectant; never use an abrasive cleaner. Do not soak the foam inner.
After cleaning, leave the cushion and cover to dry in a warm, dry place, but not in direct contact with a
heat source.

REISSUE

If you reissue or are about to reissue this product, please thoroughly check all components for their
safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.

IMPORTANT INFORMATION

The information given in this instruction booklet must not be taken as forming part of or establishing any
contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its
subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the user
you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer (detailed
below) if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.com
Usage and Maintenance Instructions
Email: sales@aidapt.co.uk
2
3EX
Ver.2 08/2012 (2196)