Before Use; Intended Use; Fitting Instructions - aidapt VP102 Fitting And Maintenance Instructions

INTRODUCTION
Thank you for deciding to purchase the Tri-Walker Bag from Aidapt. The Aidapt Tri-
Walker Bag is manufactured from the finest materials available. When used
correctly it is designed to give many years of reliable, trouble-free service.
NB. This equipment must be installed by a competent person.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

The Aidapt Tri-Walker Bag has been designed to fit neatly to the Aidapt range of
Tri-Walkers and provide hands-free storage for Tri-Walker users.

FITTING INSTRUCTIONS

1. The Tri-walker bag should be fitted when the walker is set in the open
position.
2. Take the strap situated upon the upper side of the tri-walker bag and wrap
this around the diagonal bar of the frame (fig.6) and push the stud
fasteners together. Repeat on the opposite side.
3. Take the strap on the side of the tri-walker bag and wrap this around the
vertical bar of the frame (Fig. 6a) and again push the stud fasteners
together.
Fitting and Maintenance Instructions
Fig. 6 Fig. 6a
2
Ver. 2 08/2012 (2214)