Summary of Contents for Campania International FT-344
Page 1
FT-344 Concourse Sphere Fountain Assembly Instructions Fountain Information: • Professional installation is recommended for this fountain! • This fountain holds approximately 130 gallons of water. • This fountain uses a large fountain cover: FTNCOV-LG (does not cover basin) • Compatible with #10 Refill Device and LED kit •...
Page 2
FT-344 Concourse Sphere Fountain Assembly Instructions Professional installation is recommended for this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-344 Concourse Sphere Fountain Assembly Instructions Step 11 - Position the copings about 6" from the basin. Step 12 - Carefully push each piece one at a time toward the basin and into the notch of the coping starting with the straight copings (FT-343E).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.