Summary of Contents for Campania International FT-348
Page 1
FT-348 Facet Fountain, Small Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 5 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • Refill kit is not recommended for this fountain.
Page 2
FT-348 Facet Fountain, Small Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-348 Facet Fountain, Small Assembly Instructions Step 11 - Place the top plate (FT-348A) in the center of the small bowl (FT-348B). Step 13 - Wait 24 hours before filling the fountain with water to let the silicone set. FT-348A (3 lbs)
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.