Table of Contents
Advertisement
Boot Sequence
Default is ÒA, C, SCSIÓ. This option
determines which drive to look for
first for an operating system.
Swap Floppy Drive Choose Enabled or Disabled
(default). This option swaps floppy
drive assignments when it is
enabled.
Boot Up Floppy
Enabled (default): During POST,
Seek
BIOS checks the track number of the
floppy disk drive to see whether it
is 40 or 80 tracks.
Disabled: During POST, BIOS will
not check the track number of the
floppy disk drive.
Boot Up NumLock
Choose On (default) or Off. This
Status
option lets user to activate the
NumLock function at boot-up.
Typematic Rate
Choose Enabled or Disabled
Setting
(default). Enable this option to
adjust the keystroke repeat rate.
Typematic Rate
Range between 6 (default) and 30
(Chars/Sec)
characters per second. This option
controls the speed of repeating
keystrokes.
Typematic Delay
Choose 250 (default), 500, 750, and
(Msec)
1000. This option sets the time
interval for displaying the first and
the second characters.
Security Option
Choose System or Setup (default).
This option is to prevent
unauthorized system boot-up or use
of BIOS Setup.
24
Advertisement
Table of Contents
