Table of Contents
Advertisement
Using the auto-focus framing marks to take pictures
When using the LCD as a viewfinder, framing marks indicate the camera focus area.
The camera attempts to focus on foreground subjects, even if the subjects are not
centered in the scene.
1 Press the Shutter button halfway.
When the framing marks turn green, focus is accomplished.
Framing marks
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (see
page
www.kodak.com/go/support
21) and set Center Zone, the framing marks are fixed at Center Wide.
Taking pictures and videos
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
7
Advertisement
Table of Contents
