Spon nas-8513 Installation Instructions

IP Network Intercom Terminal Installation Instructions
"123456".
（2）From the right menu choose【Mandatory method configuration】, then fill in the
correct parameters in the【terminal parameters】, click "send parameters" button to
complete the IP parameters Setting.
Specification、Function unit& Parameter
Power voltage DC12V
Consumption ≤5W
Network input Alarm input Alarm output Power input
Interface
Audio output
Support network protocol TCP/IP、UDP、ARP、ICMP、IGMP protocol
Network chip rating 10/100Mbps
Audio sampling 8kHz～22.050kHz, 16bit
Transmit rate 16kbps-352kbps
SNR >90dB
Frequency response 20Hz-16KHz
Malfunction Test
Fault phenomenon
Why it appear "terminal Appearing this warning information, it's usually the
network services (UDP) start local server network connection has been
fail" warning in the process of disconnected, please connect the local network
starting server software? cable well and exit the software, then restart it.
1. It`s required to close all firewalls or with data
interception function software before open the
Why scanning tools can't find
software server
the terminal?
2. Network card do not compatible with terminal.
3. Using other computer to scan the machine.
Packing List
Reason& trouble removal
1 2
IP Network Intercom Terminal Installation Instructions