Alarms Table - Bauknecht GKNE 1770 A Quick Start Manual

Read the Instructions for Use carefully before using
the appliance.
1. Control panel
2. Light (LED system)
3. Ice packs*
4. Twist Ice Maker*
5. Glass shelves
6. Rating plate with commercial name
7. Door reversibility kit
8. Area for freezing fresh food or to store frozen food
9. Area for storing frozen foods
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second.
The default (factory) values of the freezer compartment
settings light-up.
HOW TO CHANGE DOOR SWING
- see enclosed instructions (Model Version_1).
Specifications, technical data and images may vary
from model
QUICK START GUIDE
SMART DISPLAY
This optional function can be used to save energy. To activate the
Smart Display, press the buttons and together for 3
seconds until an audible signal sounds. To deactivate this function
repeat the same procedure. Remember that this function does not
disconnect the appliance from the power supply, but only reduce the
power consumed by external display (see the Instructions for Use).
ON/STANDBY
To put the product in Stand-by, press and hold for 3 seconds. All the
icons turn off except On/Standby indicator . Press again to
reactivate the appliance.
GREEN INTELLIGENCE indicator
Green Intelligence technology automatically works to ensure the
optimal conditions to preserve the stored food.
ECO NIGHT FUNCTION (NIGHT TIME RATE)
Press to activate/deactivate the Eco Night function. The Eco Night
function enables appliance energy consumption to be concentrated in
the reduced rate hours, generally at night (see the Instructions for
Use).

ALARMS TABLE

Signal
The acoustical alarm is activated and the Alarm Indicator
Door open alarm
The Temperature display blinks (°C) and the Alarm Indicator
Temperature alarm
The Black Out Alarm icon remains on, the Alarm indicator
Long Black-Out alarm.
Temperature display (°C) blinks, showing the maximum temperature reached during blackout.
Malfunction. The letter "F" blinks on the display (°C).
D GB F NL E P I GR S N
TEMPERATURE DISPLAY (°C)
Set temperature display.
KEY LOCK indicator
Cause
blinks.
The door has remained open for more than 2 minutes.
remains on.
The inside temperature is not adequate.
blinks and the
Prolonged power failure, able to cause the inside temperature to increase to 0°C.
Product malfunction.
DK FIN PL CZ SK H RUS BG RO UKR
TEMPERATURE SETTING
The appliance is normally factory-set for operation at the
recommended temperature of -18°C. The internal temperature can
be adjusted between -16°C and - 24°C, proceeding as follows:
• Press to change the set point (°C). The storage temperature can
FAST FREEZE
Press to activate the Fast Freeze function (see the Instructions for
Use). The function switches off automatically after about 50 hours.
BLACK OUT ALARM
Long Black-out Alarm indicator. (see the Instructions for Use)
STOP ALARM/KEY LOCK
Press in case of alarm (see the below Alarms
Table).
To lock/unlock the keys of the Control Panel,
press the Stop Alarm button for 3 seconds: the
Key Lock Indictor will be displayed for a short
time and an acoustical signal will be played.
Cure
Close the door.
Press the Stop Alarm button
blinks and the Alarm Indicator
Press the Stop Alarm button
blinks and the Alarm Indicator
Contact the After-sales Service.
CA
GB
be changed by -1°C with each pressure of the button: the value
changes cyclically between -16°C and -24°C.
; the acoustical alarm stops, the Temperature Display (°C)
remains on until a temperature < -10°C is reached.
; the acoustical alarm stops, the Temperature Display (°C)
remains on until a temperature < -10°C is reached.
5019 420 00014