Error Messages - Intermatic ET70115C User Manual

Intermatic et70115c time switches: user guide
Table of Contents

Advertisement

ERROR MESSAGES

Pressing HELP when an error code is displayed will cause an error
message and recommended action to scroll on display. Press any
key to stop message and restore pre-error display.
ERR 01 Too many keys pressed or HELP key not pressed first
ERR 02 Numeric entry not applicable
ERR 03 AM - PM key entry not applicable
ERR 04 Clock time not setup
ERR 05 Clock date not setup
ERR 06 ASTRO not setup
ERR 07 HOLIDAY not setup
ERR 08 OVERRIDE not setup
ERR 09 ASTRO entry not applicable
ERR 10 COPY key not applicable
ERR 11 Unable to clear a set point in week long review mode –
set points may only be cleared from an individual
day's program
ERR 12 Internal calculation error – may not be recoverable –
reset the time switch
ERR 13 Day groups may not be copied to or from
ERR 14 No ON or OFF time entry is allowed when entering an
Astro Set Point
ERR 15 A day may not be copied to itself or to a day which has
already been programmed.
ERR 16 February 29th is only permitted in leap year
ERR 17 No circuit selected–select a circuit using the circuit
enable switches
ERR 18 Astro entry is out of limits–SUNRISE must be before
noon and SUNSET must be after noon. SUNSET must
not be within 5 hours of SUNRISE.
ERR 19 The date does not agree with the previously entered
day of the week–review and correct one of the entries.
ERR 20 Holidays may not end before they start and they must
end by Dec. 31.
ERR 21 The selected holiday has already been used–Press
REVIEW to see its definition.
38
ERR 22 HOLIDAY PROGRAM must be cleared before
clearing holiday number.
ERR 23 Copied to days may be cleared but may not be copied
or changed.
ERR 0A HOLIDAY entry not applicable
ERR 0b Override entry not applicable
ERR 0C PULSE entry not applicable
ERR 0d INTERVAL entry not applicable
ERR 0E Invalid or incomplete entry
ERR 0F Unrecognized key (or too many keys pressed)
ERR 1A No AM or PM selection
ERR 1b Review entry not applicable
ERR 1C One or more of the selected circuits has a program
conflict
ERR 1d The day of the week entry does not agree with the
previously entered date–the date has been cleared and
you must re-enter both
ERR I E Out of memory
ERR I F Holidays may not overlap - Press REVIEW to identify
the conflict.
NOTE: Error messages are subject to change with later software
revisions.
Next Generation
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents