Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sanmenxia ZX400
Summary of Contents for Sanmenxia ZX400
- Page 1 OPERATION MANUAL FOR GAUGE UNIT ZX400 Sanmenxia ZhongyuanJingmiCo.,Ltd...
- Page 2 In order to use the instrument safely, please follow the following instructions DANGER ⚫ Hazardous voltage can cause injury or death. ⚫ Do NOT take out the covers unless there is qualified maintenance personnel. ⚫ Please turn off the power switch and disconnect the power supply cable before taking outcovers.
- Page 3 3. Please do NOT use organic solvents such as alcohol to clean the device. ABOUT CARRYING ABROAD Due to the various local rules, please inform us before taking this device out of China. Our company will not be responsible for any overseas accident if there is no declaration.
-
Page 4: Table Of Contents
CONTENTS 1、Introduction ---------------------------------------------------------------1 2、Features---------------------------------------------------------------------2 3、Extension Function-------------------------------------------------------3 4、Interface --------------------------------------------------------------------4 4.1、Measuring Interface --------------------------------------------------5 4.2、Setting Interface -------------------------------------------------------6 4.3、Adjustment Interface--------------------------------------------------7 5、I/O Interface And Connection-------------------------------------------8 6、WSD-100 external receiving power signal table---------------------9 7、Method Of Use--------------------------------------------------------------10... -
Page 5: 1、Introduction
1、Introduction Z400 controller is based on the latest digital signal processing system, using the latest control technology designed for grinding machine processing on-line monitoring and control of the instrument. This controller will be processed or after the size of the workpiece, with electric sensor for measurement, if the use of air momentum meter for measurement, it needs to be measured through the pneumatic probe and AE converter. -
Page 6: 2、Features
2、Features 1) Intelligent control：All kinds of calculation and correction can be carried out within the standard range, or the machining size correction can be completed automatically under the control of the machine tool. In the process or after the processing of the measurement process, display a variety of measurement results and judge the status of the point, while sending a signal to control the movement of the machine. -
Page 7: 3、Extension Function
4)Good compatibility：In addition to the improvement of control, display, operation, reliability and signal acquisition accuracy, the new meter is easy to install and maintain. 5)Optimized design, the whole machine can meet the industrial interference test. 3、 Extension Functions: 1)External compensation：The measured data are compensated and zeroed according to external input signals. -
Page 8: 4、Interface
4、Interface Instructions： ZX400 type active grinding measuring instrument is divided into three function Windows, measuring, setting and adjusting.The system defaults into the measurement module. Click the button to enter the setting window. Click the button to enter the adjustment window. -
Page 9: Measuring Interface
4.1 Measuring the interface Measurement interface Window functions:The measured value of the measuring item is displayed, adjusted and displayed in digital form. Instruction: Displays the measured value of the measured item. Display signal points. Display compensation value. ： - 5 -... -
Page 10: Setting Interface
4.2 Setting interface If you need to change the setting parameters, click the number section, and the keyboard pops up for setting. Instruction： P1 Signal points of rough grinding ； P2 Signal points of fine grinding； P3 Light grinding signal points； P4 The signal point of retreating knife;... -
Page 11: Adjustment Interface
Signal point setting value: P1>P2>P3>P4; SCUT The reverse cut value； M Measurement expression：Can choose G1 ,G2 ,G1+G2 ,G1-G2； S Filter way：Can choose 0, 1，2，3，4，5. (This option is a special function and is only available when the user makes a special order.) 4.3 Adjustment interface Instruction：... -
Page 12: 5、I/O Interface And Connection
5、I/O interface and connection Number Single item Thread color Remarks OUT 1 Orange OUT 2 Yellow OUT 3 Pink OUT 4 Blue OUT 5 Receipt OK Brown OUT 6 Green OUT 7 Light green IN 1 Red/White COM OUT COMOUT White IN 2 Compensate +... -
Page 13: 6、Wsd-100 External Receiving Power Signal Table
6、WSD-100 External receiving power signal meter WSD-100 External receiving power signal meter Terminal number ZHD-1140BC（ZHS-173DC) AC 220V AC 0V Red line Yellow line Black line COM Retract input (switch signal) Retract input (switch signal) COM - 9 -... -
Page 14: 7、Method Of Use
7、Method Of Use 7.1Adjustment method for standard double rod single chann el sensor（ZHD-1070BC\1090BC\1080BC） Enter the boot screen and press the button above the screen set the display value after compensation to 0. Adjust the upper and lower contacts away from the measuring surface.Click ，the system enters the adjustment window, the interface displays G1, records the size of the display value, adjusts the... - Page 15 Enter the boot screen and press the button below the screen set the display value after compensation to 0. Adjust the contact away from the measuring surface.Click ，the system enters the adjustment window, the interface displays G1, records the display value, adjusts the contact to make the display value change to about 0 (the value is within ±30), and locks the contact.
- Page 16 7.4Adjustment method for standard pneumatic sensors（ZHS- AH series） Enter the boot screen and press the button below the screen set the display value after compensation to 0. Click ，the system enters the adjustment window, the interface displays G1, records the size of the display value, adjusts the throttle valve of the sensor, makes the display value change to about 0 (the value is within ±...
- Page 17 V1.4 20211108 Sanmenxia ZhongyuanJingmiCo.,Ltd Address: east section of weiliu road, sanmenxia industrial park, henan, China Tel：0398-2751818 Fax：0398-2751819 Postcode：472000 http://www.zyjm.com...