YOWHICK GDP1B User Manual page 22

Tips：
USB debugging steps may vary due to different devices' Android OS differences. Search for How to open the USB
debugging mode on "Your device" in Google. Actual prompts are based on Samsung Galaxy S9+ OS.
1. Open the 'Settings', tap About->Software information->Build number;
2. Tap "Build number" seven times until it shows Developer mode is turned on；
3. Go back to settings, scrod down, and select 'Developer options'；
4. Find the "Debugging" section；
5.Tap the toggle next to "USB Debugging".
1. Some Android devices may not support screen mirroring due to the compatibility. Such as: some models of
Google/Motorola/Sony
2. Some Android devices may only transfer the display without audio due to the protocol restrictions.
B. iOS
iOS has 3 connection methods：
Method 1： Wireless connection with Wi-Fi router
(Recommended)
1. Connect the projector to a Wi-Fi router；
2. Select iOS Screen Mirroring function；
3. Connect your iOS device to the same Wi-Fi
router.
4. Turn on Screen Mirroring on your iOS device,
YOWHICK-XXXXX
find the projector for pairing.
- 20 -