Page 1
USER MANUAL 5500L Lab Stand Kit Including optional X-Y Stage www.jchadwickco.com support@jchadwickco.com Toll Free (866) 358-9955 Fax (626) 358-1448 1005 S. Mountain Ave. Monrovia CA 91016 Scan QR Code (with smartphone camera) to view a short training video on our website.
Page 2
5500L Lab Stand Kit Safety Ring Base Plate Focus Block w/ Pole Bottom Pole Top LAB STAND STORAGE 1. Adjust Focus Knobs so that the tops of the moving parts align with the stationary parts of Focus Block to prevent damage.
Page 3
Use the Focus Knobs on the Focus Block for coarse positioning after clamping. Note: When in focus, the 10X objective lens will be approx. 0.250” above specimen with the 10X installed, or 1” with the 4X installed. 5500L Lab Stand Correct Setup with Optical Micrometer and Flashlight...
Page 4
X-Y STAGE INSTRUCTIONS 1. The X-Y Stage attaches to the Lab Stand with (4) ¼-20 x ½” Socket Head Cap Screws on the underside of the Base Plate. 2. To remove the X-Y Stage: Loosen the Socket Head Cap Screws with an Allen Wrench (not included) and remove the X-Y Stage from the Base Plate.
WARRANTY INFORMATION John Chadwick Corporation DBA J Chadwick Co warrants the 5500L Lab Stand Kit, herein referred to as the product, against defects in material or workmanship as follows; LABOR For a period of two (2) years from the purchase date, if the product is determined to be defective, J Chadwick Co will repair the product at no charge to the buyer.