Table of Contents
Advertisement
Quick Links
NINGBO LONGMA VEHICLE INDUSTRY CO.,LTD.
Add:No.29 kandun East Road,Cixi,Avenue,Sansizao Village,
Kandun Sub-District,Cixi City,Zhejiang Province.
Tel:0086-574-23670081 23670083
Fax:0086-0574-63288372
Http://www.loma-cardle.com
E-mall:sales@loma-cardle.com
P.C:315303
INSTRUCTION FOR USE
Congratulations on your purchase of the child seat.Please read this instruction
manual carefully before use.If you have any questions concerning the use of this
child seat,please do not hesitate to contact us.
CHILD RESTRAINT WITH ISOFIX
LM230
WARNING:DO NOT place rear-facing child seat on front
seat with airbag.DEATH OR SERIOUS INJURY can occur.
GROUP 0+,I,II,III
SUITABLE FOR CHILDREN
LESS THAN 36 KG
Advertisement
Table of Contents
Related Manuals for NINGBO LONGMA VEHICLE INDUSTRY LM230
Summary of Contents for NINGBO LONGMA VEHICLE INDUSTRY LM230
- Page 1 CHILD RESTRAINT WITH ISOFIX LM230 NINGBO LONGMA VEHICLE INDUSTRY CO.,LTD. Add:No.29 kandun East Road,Cixi,Avenue,Sansizao Village, GROUP 0+,I,II,III Kandun Sub-District,Cixi City,Zhejiang Province.
-
Page 2: Table Of Contents
LMSM23020060300 DIRECTION GROUP METHOD OF INSTALLATION TYPE Rearward 0+ I ISOFIX+TOP TETHER SEMI-UNIVERSAL Contents Forward ISOFIX+TOP TETHER UNIVERSAL Forward I,III ISOFIT+3-point safety belt 1.Vital information-READ NOW..............3-4 SEMI- UNIVERSAL Forward I,III 3-point safety belt UNIVERSAL 2.Safety instruction..................5 3.Using safety seat in this way..............5 Notice regarding Universal category (Group 0+ I II III) 4.Parts and interior equipment..............6 1. -
Page 3: Vital Information-Read Now
IMPORTANT!Ensuring that any lap straps is worn low down,so that the Notice regarding Universal ISOFIX child restraint system (in Group 0+,I) pelvis is firmly engaged. 1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04 series of Do not use any load bearing contact points other than those described in amendments for general use in vehicles fitted with ISOFIX anchorages systems. -
Page 4: Safety Instruction
2. Safety instruction 4. Parts and interior equipment Headrest height and adjustment button Only suitable if the approved vehicles are fitted with 3 point safety-belts,approved to DIAGONAL BELT DIAGONAL BELT Seat pad Head support UN/ECE Regulation No.16 or other equivalent standards. Belt route slot group II,III LAP BELT... -
Page 5: Scope Of Application For Children
6. Height adjustment for head support and shoulder harnesses 5. Scope of application for children Please adjust the head support and check if the shoulder harnesses are at the correct height for your child. Notice:When used rear facing and forward facing,the shoulder harness height must be GROUP 0+,I even with or just above the child’s shoulders ( Rearward facing... -
Page 6: Using The Buckle
9.Adjust the harness 7. Using the buckle Locking Method -Loosening the shoulder harness Press the adjuster button under the cover and at the same time pull both shoulder straps forward. ② ③ ① Unlocking Method Locking Method： Align the left and right buckle tongues to one tongue and insert into the buckle until you hear a “Click”. -
Page 7: Instruction For Seat Rotation
12. How to use the isofix guide 11. Instructions for seat rotation In order to lock the isofix connector to the steel point successfully, it can use isofix guide. PULL Step 1: Pull the swivel button , make UNLOCK the seat unlocked Step 1:Find out ISOFIX Step 2: Insert ISOFIX guides to connection in the car. -
Page 8: Installation Of The Child Seat Group 0+,I
14. Installation of the child seat group 0+,I Step 4: child safety seat must It is suitable for the weight 0-18 kg, given to children about 0-4 years old. be against the car seat firmly( B4）. PUSH Notice:The child safety seat not be against the car seat, It is very dangerous. - Page 9 Step 7: String the belt of top tether until the adjuster shows green(B7). Roll up the extra ribbons and put them away to prevent baby from playing， It is very dangerous Step 9: Press the webbing adjustment button,while pulling out the shoulder harnesses to the proper length(B10) Step 8:Pull the button ,rotate the baby car seat to the side...
-
Page 10: Installation Of The Child Seat Group I
15. Installation of the child seat group I Step 12:Use one hand to pull out the It is suitable for the weight 9-18 kg, given to children about 9months-4 years old. adjuster, mean while use the other hand t rotate the seat,Keep the seat in rearward position(B13). - Page 11 Step 7: String the belt of top tether Step 4: child safety seat must until the adjuster shows green(C7). be against the car seat firmly( C4）. Roll up the extra ribbons and put them away to prevent baby from playing， PUSH Notice:The child safety seat not be It is very dangerous...
-
Page 12: Installation Of The Child Seat Group Ii,Iii
16.1 Hide 5-point harness system Step 1: Press the webbing adjustment button,while pulling out the shoulder harnesses to the proper length(D3) Step 10:Put the child into the seat and fasten the harness ,then pull the adjuster strap until the harness is fully tightened(C10). - Page 13 16.2 Securing the child Step 1: Put the seat against the car seat(D9) Notice: The child safety seat not be Step 4:keep the removed cushion and against the car seat. It is very dangerous accessories well(D6). Notice: Adjust the seat angle to first gear. Inclination angle Step 5:open the fabric cover of backrest and get the harness go through the...
- Page 14 Right Too low Too high Step 5:Fasten car seat belt and make sure, it is tight enough(D16). Important:Ensuring that any lap straps is worn low down,so that the pelvis is firmly engaged,shall be stressed. Step 3:Use the height adjuster to adjust the height of the headrest according to the child's height.The gap between head belt guide and baby is 2 finger width.The...
-
Page 15: Remove The Cover
17. Remove the cover Step 1:Pull the button ,rotate the baby car seat to the side facing position(E1). Step 5:Pull out the shoulder belt, keep the removed cushion and PULL UNLOCK accessories well(E5,E6). Step 2: Loosening the shoulder harness(E2) PRESS Step 6:open the fabric cover of backrest and get the harness go through the hole(E7). -
Page 16: Maintenance And Cleaning
18. Maintenance and cleaning 18.1 Daily maintenance 1.In daily use,check periodically the child seat.The child seat should be replaced after an accident. 2.Please keep this child seat in dry and ventilated place to avoid damp moldy. 3.If the child seat becomes dusty,clean the seat belt and the plastic pieces by swiping them with a damp sponge and let it dry naturally. -
Page 17: List Of Approved Cars
19. List of approved cars The following vehicle list is only for reference. If your vehicle does not in the list, before using, please consult with the retailer or manufacturer. Saloon No.of doors Estate No.of seat Convertible Before you purchase the vehicle, check that it is equipped with the appropriate anchorages Hatchback...