Advertisement
Home
Treats
• Always use away from any water sources
• Never leave the appliance unattended when not in used
• A damaged or defective supply cord should only be replaced by service centre.
• Always use on a heat resistant surface
• Always allow to fully cool before moving or cleaning the crepe maker
• Do not use close to walls, cupboards, drapes or curtains.
• Do not use sharp tools on the baking plate. Do not cut crepes on the plate
First Use & Product Assembly
• Remove all packaging materials.
• Wipe the baking plate with a slightly damp cloth.
• Place the base on a clean level heat resistant surface.
• Position the crepe maker so that it is level.
• Plug in turn on crepe maker and allow to heat for 10 minutes.
• There may be slight mist/smoke on first use this is expected as protective
coating heats for the first time
• Turn off the crepe maker, unplug allow to cool.
• Wipe again the baking plate with a slight damp cloth.
• The device is now ready for use.
Use & Opera�on
1.
Add the power plug into the
wall socket and switch on.
Turn the dial to MAX both the
power light and ready light will
turn be on.
Heating time can be 2-5
minutes. When the baking
2.
plate has heated the ready
light will turn off. The baking
plate has now reached cooking
temperature. Now adjust the
temperature dial to suit batter
thickness
KA918 |
1.
2.
| pg. 3
v1.0
Advertisement
