A+ ones. To take advantage of warranty services it is necessary, at the moment you receive your machine to completely fill out the warranty card and send back as soon as possible to A-Plus Automation. The warranty will be valid after it is received & recorded at A-Plus Automation.
Page 5
A1-M-XL SYMBOLS SYMBOL MEANINGS Indicates situations involving great hazard risks which, if overlooked, could DANGER put people’s health and safety in great danger. Indicates technical information of particular importance which must not be WARNING overlooked. The user is requested to check the proper positioning of any element of the INQUIRY machine, before operating a certain command.
Page 6
The manual Frame Assembling Machine A1-M-XL has been realized for the production of frames. The A1-M-XL being of simple construction and extremely easy to use, makes it possible to join with absolute precision any kind of moulding by using special steel A+ wedges to realize molding joints.
Page 7
A1-M-XL VIBRATIONS In standard conditions conformed to the indication of machine proper utilization the vibrations do not create dangerous conditions. The average quadratic weighed level, according to the acceleration frequency to which arms are exposed does not exceed 2,5 m/s...
A1-M-XL 3. SAFETY GENERAL WARNINGS • The manufacturer, during the design and manufacturing stages, has paid special attention to the aspects that might jeopardize the safety and health of the personnel that operates the machinery. As well as the compliance with current regulation on the matter, the manufacturer has adopted all the “rules of good craftsmanship”.
A1-M-XL 3.5 SAFE WORKING PROCEDURES The machine is projected and realized to eliminate any risk connected with its use. The user is requested to achieve an adequate training to be instructed by their distributor. The other risks related with working are: •...
Page 10
A1-M-XL UNPACKING According to the installation requirements, the personnel authorised by the manufacturer will unpack the components in the most suitable way and will check their integrity. Keep all packages (cases, pallets, etc.) for future use and dispose of the protection materials (nylon, polystyrene, etc.) according to the laws in force.
Page 11
Picture 8 Picture 9 ADJUSTMENTS Being the machine completely tested and checked in A-Plus Automation’s plants before its shipment, the operator has only to effect the following adjustments: 4.8.1 Wedges inserting positions adjustment To position properly the mouldings to be assembled, the machine is equipped with a 90° fence.
Page 12
A1-M-XL Picture 10 Picture 11 4.8.2 Vertical clamp adjustment The vertical clamp can be adjusted in height and position. Proceed as follows to adjust them: 4.8.2a Vertical clamp position adjustment • Position the mouldings to be assembled on the working bench •...
Page 13
A1-M-XL CHECKING OPERATIONS TO BE EFFECTED BEFORE WORKING START Once the machine has been properly installed (as previously described), check that: • The mouldings to be assembled are properly positioned on the working bench • The magazine is loaded with the type of Wedges suitable with the mouldings to be assembled •...
A1-M-XL 5. FUNCTIONING OPERATORS The machine has been projected to be used by only one operator. • The operator, as well as being adequately informed on the use of machinery, must possess skills and compe- tence adequate to the type of working activity to perform.
Page 15
A1-M-XL picture 14 MACHINE STOP The machine can only work by pressing the mechanical foot pedal. To stop it, lift your foot from the pedal. MACHINE REINSTATEMENT The machine reinstatement is performed by pressing the foot pedal.
A1-M-XL 6. MAINTENANCE STATE OF MAINTENANCE The maintenance operations must be performed with the machine in the conditions of “Isolation for maintenance”. SPECIAL CAUTIONS During the maintenance or repair operations is suggested to proceed as follows: • Before starting any operation place a sign “machine under maintenance” in a well visible position.
A1-M-XL 7. DIAGNOSTIC SAFETY WARNINGS The interventions must be executed by personnel properly trained and they must take all precautions in order to avoid accidental starts. BREACKDOWN SEARCH Functional inconveniences (causes/remedies) TROUBLE POSSIBLE CAUSE REMEDY • Check that the Wedges sharpened side...
We remind you that only a qualified technician can repair the machine. Therefore we suggest the intervention of your local distributor or A-Plus Automation Center of Technical Assistance, which has access to qualified staff, proper equipment and tools, and who uses original spare parts.
Page 19
A1-M-XL ATTACHMENT D - SHARPENING TABLE SOFT WOOD HARD WOOD Very soft Soft Averaged soft Averaged hard Hard Very hard Height mm wood wood wood wood wood wood <> <> <> H 03 H 05 H 07 mm H 10 mm...
Page 20
A1-M-XL SCHEMES B - Mechanic Schemes A1-M-XL...
Page 21
A1-M-XL SCHEMES B - Mechanic Schemes A1-M...
Need help?
Do you have a question about the A1-M-XL and is the answer not in the manual?
Questions and answers