Related Manuals for Kielder KWT-010
Summary of Contents for Kielder KWT-010
- Page 1 KWT-010 TYPE18 ORIGINAL INSTRUCTION MANUAL For use with all variants of KWT-010 Ratchet K I E L D E R 1 8 V B AT T E RY S Y S T E M www.kielder.co KWT-010-IMA22...
- Page 3 Dated: 01/01/2021 Plug Type Kielder WT Ltd, Unit 14 Carlisle Business Park, • The appliance is supplied with a moulded 40 Chambers Lane, Sheffield S4 8DA three pin mains plug for your safety and Noise &...
- Page 4 • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. KWT-010-IMA22 Kielder WT Ltd...
- Page 5 If damaged, have the power tool repaired Have your power tool serviced or repaired before use. Many accidents are caused by by Kielder or a qualified technician using poorly maintained power tools. only identical replacement parts. This • Keep cutting tools sharp and clean.
- Page 6 • If the bit becomes jammed, turn off the trigger switch to prevent an overload. This can damage the battery pack or motor. • During charging the charger may become slightly warm. This is normal. DO NOT charge the battery for a long period. KWT-010-IMA22 Kielder WT Ltd...
- Page 7 Li-Ion • Do not use other than the Kielder For proper treatment, recovery and recycling battery packs that are designed for use of old products and used batteries, please with this rechargeable tool.
- Page 8 (11) (13) Steel Head Battery Release Button Square Drive (10) Battery Charge Level Indicator Lock Switch (11) Charger Trigger (12) Battery Insert Slide Hand Grip (13) Charge Indicator Forward/Reverse Toggle Belt Clip Battery; attached to tool KWT-010-IMA22 Kielder WT Ltd...
- Page 9 (double insulated) Volts Wear Hearing Protection Conforms to CE standard Direct Current Wear Safety Glasses Do not burn or incinerate Revolutions Per Minute Indoor Use Only Maximum safe ambient Electrical Capacity temperature for battery MAX 45ºC Kielder WT Ltd KWT-010-IMA22...
- Page 10 Selecting Forward/Reverse Using the Forward/Reverse Toggle For forward (clockwise) rotation, Reverse Forward rotate the forward/reverse toggle counter-clockwise. For reverse (counter- clockwise) rotation, rotate the forward/ reverse toggle clockwise. Check direction of rotation before use. KWT-010-IMA22 Kielder WT Ltd...
- Page 11 (or by using a manual ratchet/breaker bar for larger torque applications). The tool can then be ran in reverse to quickly remove the fastening. When using manually the tool should be held in position (insert letter and image etc). Kielder WT Ltd KWT-010-IMA22...
- Page 12 Charge Red light illuminated = Low Charge/Empty If the battery is of low charge, it should be charged before further use. The battery level indicator may be used with battery connected or disconnected to the tool. KWT-010-IMA22 Kielder WT Ltd...
- Page 13 • When the battery pack is removed from the main unit, store the battery in a location to prevent dust or dirt from contaminating the battery terminals which may cause a short circuit. Kielder WT Ltd KWT-010-IMA22...
- Page 14 If any dirt is found on the terminals always allow the battery pack to cool down clean the terminals before charging the before recharging. This will allow the battery battery pack. to be recharged to its full capacity. KWT-010-IMA22 Kielder WT Ltd...
- Page 15 Why is Registration a Requirement? importer or retailer for that country. For Kielder to be able to fully support & What is not covered? service a product warranty over a 3 year • Kielder does not guarantee the repair...
- Page 16 Notes [10x10mm] KWT-010-IMA22 Kielder WT Ltd...
- Page 17 Notes [10x10mm] Kielder WT Ltd KWT-010-IMA22...
- Page 18 Notes [10x10mm] KWT-010-IMA22 Kielder WT Ltd...
- Page 20 KWT-010-IMA21 Kielder WT Ltd Kielder K I E L D E R W O R K S T E A M Kielder WT Ltd Sheffield, UK T: +44 (0)114 242 3794 E: tools@kielder.co W: http://www.kielder.co Kielder Tools Registered in England & Wales: 09426163...
Need help?
Do you have a question about the KWT-010 and is the answer not in the manual?
Questions and answers