Table of Contents
Advertisement
GENERAL
The Wager Model RHW Series 2 Full Flow Smoke Meter is in full compliance with the
requirements of the SAE J1667 test criteria—the current U.S. standard.
The system's simple design, portability, and ease of use provide the user an effortless method
to measure diesel exhaust opacity readings with an accuracy of + or – 1 percent. With all
system components being wireless, this eliminates the need for cables and harnesses. The
wireless nature of the system reduces the effort of the operator greatly and also enables the
operator to perform testing and printing without the need to attach and detach devices. RHW
Series 2 provides readings which ensure compliance with local diesel emissions standards,
promotes combustion fuel efficiency, and also indicates if a engine requires maintenance.
The guidelines and rules of the SAE J1667 can be acquired from:
•SAE International
•400 Commonwealth Drive
•Warrendale, PA 15096 Telephone (724)776-4970
or electronically downloaded at:
•www.sae.org
The RHW Series 2 Full Flow enables the operator to enter test information (VIN, customer
address, etc) into the system, reads ambient weather conditions (relative humidity, barometric
pressure, air temperature), performs 3 preliminary and 3 final snap tests using full flow
technology, and outputs all this data for printout on the wireless portable printer.
Throughout this manual HC referrers to hand controller and SH referrers to senor head.
2
Advertisement
Table of Contents
