Download Print this page

Advertisement

Quick Links

USER
MANUAL
FOR INSTALLATION, OPERATION AND MAINTENANCE
OF SINGLE / DOUBLE DECK CAR LIFTS
Applicable Models:
SUBTERRA
Read this entire manual carefully and completely before installation or operation of the lift.

Advertisement

loading

Summary of Contents for babcopark SUBTERRA

  • Page 1 USER MANUAL FOR INSTALLATION, OPERATION AND MAINTENANCE OF SINGLE / DOUBLE DECK CAR LIFTS Applicable Models: SUBTERRA Read this entire manual carefully and completely before installation or operation of the lift.
  • Page 2 SUBTERRA Table of Contents INSTALLATION INSTRUCTIONS ..........................3 OPERATION MANUAL ............................. 5 MAINTENANCE ................................ 6 www.babcopark.ca Page 2...
  • Page 3 SUBTERRA 1. INSTALLATION INSTRUCTIONS 1.1 Before you begin: Installation, adjustments, and testing operations are to be performed by qualified staff only. Operations should be performed by skilled and authorized personnel. Please follow all instructions shown below carefully, to prevent possible damage to the car lift or risk of injury. Always be sure that the operating area is cleared of people.
  • Page 4 Never exceed the maximum capacity and height specified for the specific model. 12) Install the top platform (for the Subterra double deck lift) First: Install 4-post with bolt on lower platform, ensure 4 post is vertical Second: Install top platform.
  • Page 5 SUBTERRA Third, Finish installation of top platform, run a few test lifts, then find level by tightening bolt., ensure that the lift is operating smooth and level. 2. OPERATION MANUAL 2.1 BEFORE OPERATION: Read the entire manual before operation The lift may only be used by qualified staff, properly trained for the specific use of the machine.
  • Page 6 SUBTERRA 5) Turn on the key and red master shutoff knob 6) Engage the “down” switch and release. The lift will stop at a safe height. 7) When all is safe, press “down” button again to continue lowering, until it reaches the complete resting position.
  • Page 7 SUBTERRA Check hydraulic fluid level as follows: let the platform go up completely and in case they do not reach  maximum height, add oil. Check and tighten bolts, nuts, and screws.  3) MONTHLY MAINTENANCE Check the tightening of screws ...