Page 1
Battery Replacement Guide Revised 12/07/2020 The procedure below is for the changing of a battery in a BODYCAM 4 using a new replacement battery (P/N: BC4-BAT). 1. Power off camera and place lens side down on a flat surface. 2. Using a #1 Philips screwdriver, remove the six screws on the rear of the camera.
Page 2
BODYCAM 4 Battery Replacement Guide Revised 12/07/2020 5. Disconnect the original battery by gently pulling on the red/black wires in the upper left corner of the camera to disconnect the white connector from its jack. 6. Connect the new battery to the white connector in the upper left of the camera, ensure the red wire is oriented towards the top as designated.