USE
Please Note!
Never leave the
■
smoker box
Smouldering smoker powder
gets very hot and transfers
the heat on to the vessel.
The stainless steel parts will
■
heat up in direct sunlight!
Only touch the stainless steel
■
lid on the slide control and
allow the
box
to cool down for at least
30 minutes after use – the
stainless steel insert & lid
may still be very hot imme-
diately after use!
1. Select a location that is shel-
tered from the wind to set
up the
Vapo Wesp smoker
box.
2. Pour the coffee/herb mix-
12
VapoWesp
unattended!
VapoWesp smoker
ture into the stainless steel
bowl (3).
3. Ignite the mixture at se-
veral points with a long
lighter / match and make
sure there is not much wind
blowing.
4. Place the stainless steel
lid (2) on the stainless steel
bowl.
It may take a little whi-
L
le before the mixture
smoulders, so please be
patient.
5. Only place on the stainless
steel lid (2) once smoke is ri-
sing. Use the slide control (1)
to regulate the smoke.
When the VapoPulver
L
powder becomes "ex-
hausted" (so less smoke is
rising), you can activate it