Air Structures International IGOAL Step-By-Step Instructions

From
Air Structures International
The crossbar will be straight and aid your
Tip
enjoyment of your game on a level surface.
The pump provided will only allow the IGOAL to
Tip
inflate to required pressure.
Long slow pumps are more effective than trying
Tip
to go fast.
On larger sizes the rear cantilever needs to be
Tip
secured to stop IGOAL tipping forward.
Step 1
Roll IGOAL out of bag
onto level surface.
Step 3
Using the pump provided
(and only this pump) attach
to valve which is situated at
the side of IGOAL (rear of
cantilever on larger sizes)
making sure that the valve is
turned fully anti-clockwise.
Step 5
Inflate for approx. 20-30
pumps (under normal
circumstances) and screw
the valve cap back on tight
after inflation.
Step 7
Ensure that the IGOAL
is secured at all times by
means of the appropriate
supplied anchor system -
details below.
Step by step
instructions to set
up your IGOAL
This product is covered by a ONE YEAR GUARANTEE against
manufacturing defects – please refer to website for full details
www.airstructuresinternational.com
This is a portable goal, ALWAYS take the
Tip
IGOAL where it is to be used.
You do not need trainers or sports footwear
Tip
for this - high heels work ok!
Make sure pump is not still attached to valve when
Tip
popping up IGOAL into position.
If ground is hard or stony it may be better to use
Tip
the sandbags.
Step 2
Make sure net is not
caught on hose or
connectors.
Step 4
Attach the other end of
the pump hose to the
INFLATE position on the
pump handle. Put feet on
the foot plates on either
side of the pump for
stability.
Step 6
Pop IGOAL up into
upright position. On
larger sizes it may be
necessary for 2 people to
carry out stage 6.
Step 8
If fixing on grass - please use
the ground pegs provided -
attach pegs provided at front
and back of both side returns.
On larger sizes with cantilever
- place 2 pegs overlapped
over each black cantilever.