Page 1
Unit 6, Logman Centre, Greenbank Crescent, East Tullos, Aberdeen, AB12 3BG Tel: +44 (0) 01224 870765 sales@jcmload.com www.jcmload.com ALRS User Instructions P a g e...
Units of measurement……………………………………………………………………………….Page 4 Peak mode…………………………………………………………………………………………………Page 4 Test battery……………………………………………………………………………………………….Page 5 Settings menu…………………………………………………………………………………………...Page 5 Auto off……………………………………………………………………………………….…Page 6 Data out…………………………………………………………………………………………Page 6 ID……………………………………………………………………………………………………Page 6 Tare function……………………………………………………………………………….…Page 7 Zero function………………………………………………………………….………………Page 7 Pair the ALRS system.………………..………………………………………………………………………..Page 8 Load cell resolution …..…………………………………………………………………………………………Page 9 P a g e...
The load cell can be left switched on and can then be switched on/off from the ALRS handset but it will stay in standby mode using battery. The ALRS also has a data logging feature so when needed your load cell can do so much more for you.
PEAK MODE To use the PEAK mode on the ALRS system press the PAGE button until PEAK is displayed on the handset then press the ON button to accept. Your handset...
Once you have entered the settings menu you must enter the ID of the ALRS system to exit the menu. The ALRS system also has a SETTING menu. This is where you can use the AUTO ON/OFF battery saving menu and also data logging.
When DATA OUT is switched ON you have the option to receive data via RS232 or RADIO, with the ALRS handset you will always use the RADIO option. When you have accepted PC ON the handset will display RS232, press the PAGE...
Tel: +44 (0) 01224 870765 sales@jcmload.com www.jcmload.com To exit the settings menu, you must enter the ID of the ALRS system. When you select ID from the settings menu, press the ON button to enter. Your handset should have stored the ID number, if it does not press the PAGE button to increase the single digits of the ID number and then press the TARE button to move to the digit to the left to increase the double digits of the ID number.
Tel: +44 (0) 01224 870765 sales@jcmload.com www.jcmload.com How to Pair the ALRS Firstly, before we can go any further, we will need to know what your load cells I.D number is. If you turn on your handset it will display your I.D number? Once you know what the I.D is you can then turn off the handset again.
Unit 6, Logman Centre, Greenbank Crescent, East Tullos, Aberdeen, AB12 3BG Tel: +44 (0) 01224 870765 sales@jcmload.com www.jcmload.com Load Cell Resolution The load cell resolution can be altered or changed during calibration process & set to customers’ requirements if required. JCM sets the resolution as standard unless requested from customers.