Table of Contents Pages 1. Features 2. Parts, Specifications 3. Front Color Options 4. Card/Passcode Levels 5. LEDs & Melody Sounds 6. How to Use 7. Change Modes & Functions 8. Battery Replacement, Emergency Power 9. Punching Installation Holes 10. Emergency Opening by Force...
Features Ok Digital‘s LF series are the most intuitive and convenient digital furniture lock that incorporates 20 years of accumulated technology and know-how. RF/Passcode type model LF13-HL provides, Supports 13.56 MHz RF tag and passcode • Long battery life with mechanical type in-use indicator •...
Parts, Specifications LF13-HL AA Battery 3 pcs Bolt Emergency Drilling Point Reset RF Touch Area LED Indicator Battery Replacement Deadbolt LED Indicator Bolt Mini USB Battery Cover In-use Indicator Emergency Power Button Package included Specifications Authentication 13.56 MHz RFID Card, Passcode...
Card/Passcode Levels Card Level No. of Card Functions • Top level card but cannot lock or unlock • Only one Owner card can be registered • First touched card became Owner card • Register or delete Master card and Card only Cleaner card •...
How to Use Register Owner Card • Press button → touch any card marked “Owner” 1st touched card became Owner. Only 1 Owner card can be registered. Change Owner Card • → current Owner card → → new Owner card Melody (touch for 8 seconds) ...
Page 9
How to Use Register/Change User Card or User Code (Private) → • + Master card → touch any card marked “User” up 5 Melody • + Master card → → User code → Melody (4 to 12 digits) Either one of User card or User code can open the lock. ...
Change Modes & Functions Mode How To Use • Press 0 and touch Owner card at the same time Private Mode (Code) Lock should be unlocked to change mode. User code is set to “1111”. • Press 1 and touch Owner card at the same time Public Mode (Code) ...
Battery Replacement, Emergency Power Battery Replacement Open Battery Cover ① Need to replace the battery with new one when battery replacement LED is blinking. ② Replacing the battery does not change all existing settings and codes. ※ Please make sure the battery cover is plugged in completely. Plug in the battery cover until it clicks Emergency Power Use 5 pin mini-USB at the bottom of the front...