• The MAXIMUM user weight is 180kg. (Small, Medium and Standard) • The MAXIMUM user weight is 300kg. (Deluxe V2 Maxi) • This Deluxe V2 has been designed for indoor use only (not including wet areas).
Note: Castors should be inspected daily, ensuring that all foreign matter (hair, lint etc) is removed from the castors as soon as possible, allowing free movement of all castors. KCare AirComfort Deluxe User Manual...
Page 5
Pull in the required lever and adjust the Release the lever to set the chair in position. seat and/or backrest as required. Note: Ensure wings are up when adjusting the seat or backrest of the DELUXE V2 KCare AirComfort Deluxe User Manual...
Page 6
NOTE: Always use one hand to pull the release pin and the other hand to guide the arm to the required position. Allowing the arm to drop down without guidance may cause damage to the arm. KCare AirComfort Deluxe User Manual...
Page 7
NOTE: Always use one hand to pull the release pin and the other hand to guide the wing to the required position. Allowing the wing to drop down without guidance may cause damage to the wing. KCare AirComfort Deluxe User Manual...
Page 8
Before adjusting the leg rest, ensure that all three total lock castors are braked. KCare AirComfort Deluxe User Manual...
Page 9
HANDLEBARS The handlebars on the DELUXE V2 have been ergonomically designed to allow operators of various heights to have a multitude of hand positions, ensuring comfort and maximum leverage when manoeuvring the chair and occupant. KCare AirComfort Deluxe User Manual...
Please refer to page 15 for details on Any exposed bolts (including castor bolts) should be servicing requirements. checked every 6 months and tightened if required. Levers Gas struts Push handle Upholstery Exposed framework Castors KCare AirComfort Deluxe User Manual...
Page 11
• Do not autoclave. Note: A full list of approved cleaners is available on the KCare website SEATING SYSTEM This product is fitted with the unique AirComfort Seating System that is designed to redistribute seating pressure and improve overall comfort.
Page 12
The AirComfort Seating System is comprised of four separate air cushions: Backrest air cushion Lumber air cushion Seat air cushion Leg rest air cushion Air Cushions • Backrest x 1 • Lumbar x 1 • Seat x 1 • Leg rest x 1 KCare AirComfort Deluxe User Manual...
Page 13
NOTE: To reset inflation level to standard setting, ensure the air cushion is first fully deflated. KCare AirComfort Deluxe User Manual...
Page 14
Correct immersion into the cushion increases overall surface contact, redistributes pressure and improves comfort. Conversely, adding too much inflation beyond standard can increase seating pressure and reduce comfort. KCare AirComfort Deluxe User Manual...
Page 15
Web: www.kcare.com.au Please advise the serial number of the product when contacting KCare or your local dealer. The serial number can found at the rear of the DELUXE V2, on the left hand side below the backrest as shown below.
SPARE PARTS PARTS IDENTIFICATION Please refer to this diagram for reference when contacting KCare or your local dealer for spare parts, stating part description. (see over page for code) Complete Upholstery Cover • AS59111 ( Std V2) • AS59116 (...
Product, in addition to complying with the requirements of any relevant legislation, is a defect, and if so KCare Healthcare Solutions agrees to (at its option) repair, replace including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer or supply equivalent goods, or pay the cost of any of those remedies to the consumer.