Page 1
AccuTherm™ SmartLOG 2021 ® MANUAL ACCSL2021 FEATURES • Monitor 1 or 2 Wireless Temperature Sensors Simultaneously • Ambient Room Temperature and Humidity Displayed & Recorded • SMS and Email Alerts • Replaceable Wireless Sensors! No down time for sending equipment back for calibration. No fumbling with wires in fridge. • Bright Color Touch Display for ease of use. • Web Dashboard, use any browser on local network No cloud, No subscription fees! • Enterprise Network Login for Security • Time automatically synchronized from internert • Reports in .PDF format • No PC Software needed *Second Temperature Sensor optional (cat#: ACCSLBLET) NOTE: This device requires an email account in order to send email and sms alert messages.
Page 2
1. Red Alarm LED 2. USB Power LED Green 3. 5v Mirco USB Port 4. Factory Reset Button Deletes All Settings 5. Power On Button 6. Wall Mount Keyhole 7. Kick Out Desk Stand 8. Battery Compartment DDL Tile 1. Logger Name 2.
Page 4
SmartLOG Overview The Accutherm SmartLOG 2021 is a wifi digital data logger (DDL) that monitors and records temperature and sensor battery status for up to two wireless sensors. SmartLOG also logs the ambient room temperature/humidity and backup battery voltage. The DDL scans for the wireless sensor in 1 minute intervals retrieving temperature, battery and signal data. This data is evaluated for, temperature excursions, low battery condition or no data which indicates signal loss from the wireless sensor.
Page 5
SmartLOG Options OPTIONS Screen: 1. Tap main screen anywhere to enter options screen. 2. Tap X to close Options Screen if no change needed. LOGGING Button: When set to OFF data will stop recording and disable sensor related alerts from being sent out. LOGGING OFF 1.
Page 6
SmartLOG Options cont.. TEST MESSAGE Button: Will send an Email and/or SMS to recipients in contact list. Received message will show... e.g. 5:52pm 3/15/2022 Test Message Host Name: HTTP://PED-Lab/ IP: HTTP://192.168.1.1344 Clicking desired link will open Dashboard in a browser. 1.
TURN OFF Buton: Powers off SmartLOG. 1. Tap TURN OFF button. 2. Tap YES in Confirm pop-up window to power off. Wait for button to transition as Email/SMS alerts are being sent out. Confirm pop-up window “Powering Off In 5 Seconds”. Troubleshooting Guide Logger not powering on check 5v adapter, usb cable, batteries...
SmartLOG Dashboard HOME PAGE Navigation Icons Logger Nane Alarm Spk, WiFi, Pwr icons Tap Spk to mute Alarm Buzzer on DDL Sensor(s) Name Temperature Guage relative to Min/Max set points Current temperature Min/Max settings values Lowest and Highest recorded Temperature, Date and Time Sensor Battery power remaining Siginal strength STATUS PAGE...
SETTINGS PAGE Access Pop-up Pin: 5 digit number If created during initial setup enter Pin number, otherwize, leave blank and click Open. SETTINGS PAGE --Wi-Fi Setting-- These fields are populated from the initial SmartLOG SETUP. To change network... Network Name: SSID (Service Set Identifier) is the name of your wireless network Password: network password.
Page 10
NOTE: Microsoft 365, Office 365, GoDaddy Office 365 and Gmail Require additional settings in order to send Emails and SMS alerts from the SmartLOG DDL. Some of these setting require Administrative Rights to the Email account to allow SMTP and to generate a unique APP PASSWORD that is used in place of your standard password. We recommend using your standard email credentials as a starting point, SEND a Test Alert and if you don’t receive the Test Alert then generate an APP PASSWORD and test again, If you still do not receive an Alert, an account administrator will need to verify that SMTP is allowed for the account.
Page 11
Watch Our SmartLOG Videos • SmartLOG Overview video • Quick-Start video • Gmail Setup video SmartLOG Kit consist of... • 1 x SmartLOG Digital Data Logger • 1 x Wireless Transmitter • 1 x 5V 1A Power Adapter • 1 x USB Cable • 2 x AAA (for transmitter) •...
Warranty With respect to the goods, unless expressly agreed otherwise in writing, Thermco Products, Inc. provides warranty for material and manufacturing defects for a period of one (1) year from date of purchase. During said period, Thermco Products, Inc. offers to provide physical examination of goods, provide repair of goods and/or components, or replace defective goods.