Table of Contents
Advertisement
Quick Links
Hard Wall Aluminium Sukkah -
Assembly Instructions
SAFETY WARNING - Please read before use
1. Your Sukkahmart Sukkah and / or Rain Roof
is intended for use in a protected garden or
yard. Do not install your Sukkah in an open area
which is exposed to high winds which may
blow your Sukkah over.
2. If you are installing a Sukkah in an open area,
we recommend that you use the Super Sukkah
ONLY.
3. Wherever you place your Sukkah, it is vital
that you anchor your Sukkah down so that it
cannot lift off the ground. If wind lifts the
Sukkah off the ground, the Sukkah may
collapse upon landing. This is especially
important when using a Sukkah Roof.
4. You can weigh your Sukkah down, by
placing sandbags or heavy objects on the
bottom horizontal beam, or, for a Hard-Walled
Sukkah on the anchoring brackets supplied.
The Hard-Walled Sukkah also comes with
adaptors which can be used to tie-down the
Sukkah, or to fix the Sukkah to your house.
1
Advertisement
Table of Contents
Related Manuals for SUKKAHMART Sukkah
Summary of Contents for SUKKAHMART Sukkah
- Page 1 Sukkah over. collapse upon landing. This is especially important when using a Sukkah Roof. 2. If you are installing a Sukkah in an open area, we recommend that you use the Super Sukkah 4. You can weigh your Sukkah down, by ONLY.
- Page 2 Hard Wall Aluminium Sukkah - Assembly Instructions The basic Sukkah kit is 2x3 Meters with a door and a window. Any size larger than this will come with separate 'extension' kits of 2 x 1 running meters or 2 x 2 running meters.
- Page 3 Sukkah Elements Door (do NOT construct these yet) Door beams and panels – (put these aside for your door) Hinge Beams (2 beams joined together with hinges) - 1 Handle Beam (beam with handle and latch on) - 1 Hook Beam (beam with hook for latch on) - 1...
- Page 4 Ensure they are flush against each other Use the supplied tool to turn the bolt The lock will lock the beam in place. To build a 2x3 Sukkah Step 1 - Start with the bottom and upright beams first. NB - Ensure that both...
- Page 5 Step 2 – Insert the first row of panels into the slots Pic 1 – Panel going in On a 2 meter wall, use a 2-slot upright beam between the two panels NB: Panels are not exactly square. Make sure you insert the panels long side up.
- Page 6 Step 3 – Place a crossbeam on top of the panel, insert a second panel on top of the crossbeam and close the top off with a 1 or 2 meter crossbeam. Leave a gap for your window. Step 4 – To complete the door, place the white panel with the green sticker at the bottom, a 1 meter crossbeam on top of it, followed by the white panel with the red sticker and another 1 meter crossbeam.
- Page 7 Step 6 – Place top supports ontop of your Sukkah for added strength (Pink Stickers). 2m x 3m ARIAL VIEW 3m x 4m ARIAL VIEW Joiner (4 x 4 cm)
- Page 8 Step 7 – Use remaining supports to anchor your sukkah. Use Rings to fix to wall or tie down Upright Pole Sandbag over a foot Foot Place a sandbag or heavy item ontop of foot...
Need help?
Do you have a question about the Sukkah and is the answer not in the manual?
Questions and answers