Advertisement
Quick Links
Unloading:
The panels can be unloaded from a lorry using a forklift truck. When lifting, special care must be taken to ensure that the panels
cannot slip or fall off. The panels can also be unloaded and installed using a crane.
Storage: Never stack directly more than 5 panels at a time. It is recommended to stack a maximum of 4 packs of 5 panels on top of
each other. Each pack can be separated by 3 square timbers (100mmx100mm) to allow later lifting by forklift truck.
Use of the panels:
Single-sided use. The upper side is engineered with a tread pattern.
Distribution Partner: Fomacon Group
Mörsenbroicher Weg 191 | D- 40470 Düsseldorf
General information
Tel.: +49 211 975 323 90
Free call: +49 800 11 00 77 5
produced by:
www.vario-mat.com
E-Mail: info@vario-mat.com
Advertisement
Related Manuals for OKULEN VARIO mat F
Summary of Contents for OKULEN VARIO mat F
- Page 1 produced by: General information Unloading: The panels can be unloaded from a lorry using a forklift truck. When lifting, special care must be taken to ensure that the panels cannot slip or fall off. The panels can also be unloaded and installed using a crane. Storage: Never stack directly more than 5 panels at a time.
- Page 2 produced by: Lifting and laying: Each panel has 4 lifting lugs. A lifting device must be inserted into each eyelet. These devices must in turn be connected to a lifting hook (on a chain sling). With the help of the chain sling, the panel can be moved to the desired position and installed. Distribution Partner: Fomacon Group Tel.: +49 211 975 323 90 www.vario-mat.com...
- Page 3 produced by: Connecting 2 panels: Connect and screw the panels together using the 2-way connecting cover panel and 2 hexagonal screws (M16x30mm). All adjacent panels must be connected in this way. Connecting 4 panels: Connect and screw the panels together using the 4-way connecting cover panel and 4 hexagonal screws (M16x30mm). All adjacent panels must be connected in this way.