Download Print this page
Insinger CA-3 Specifications

Insinger CA-3 Specifications

Pot and pan washers
Hide thumbs Also See for CA-3:

Advertisement

Quick Links

CA-3
DA-3
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
www.insingermachine.com
CA-3 and DA-3
POT AND PAN WASHERS
DESIGN
Automatic door type utensil washer with a timed wash-and-rinse
cycle. Fully automatic operation with power on/off button. CA-3
capacity is 25- 24" X 28" racks per hour, or 150 bun pans/hr or 100
steam table (2" thick) pans/hr. DA-3 capacity is 50 - 24" X 28" racks
per hour, or 276 bun pans/hr or 184 steam table (2" thick) pans/hr.
Cycle starts when doors are closed. Designed for straight through
operation. CA-3 is available for corner operation.
STANDARD EQUIPMENT
Tank heat: 5 KW electric
immersion heater or steam injector
Capillary thermometer for wash
and final rinse
Vacuum breaker on all incoming
water lines
Rack assortment (CA-3: 1 general
utility, 1 bake sheet, 1 basket)
(DA-3: 2 general utility, 2 bake
sheets, 1 basket, 1 counter pan)
Manifold cleanout brush
Inspection door
Vent opening with adjustable
damper (1 for CA-3, 2 for DA-3)
SureFire
Start-Up and
TM
Check-Out Service
Door safety switches
Automatic tank fill
OPTIONAL ACCESSORY EQUIPMENT
Stainless steel steam coil tank heat
Pressure reduction valve and
line strainer
Steam booster
Electric booster
Item #_____________
Single point electrical connection:
motor, controls, and heater
S/S frame, legs and feet
S/S front panel
Low water protection
Detergent connection provision
Hold down grid
Rollers for track on DA-3
Fully automatic operation
Manual bypass selector switch
Side mounted control panel
(NEMA 12)
Simplified scrap screen design
Interchangeable upper & lower
spray arms
Standard frame drip proof motor
Security package
Totally enclosed motor

Advertisement

loading

Summary of Contents for Insinger CA-3

  • Page 1 DESIGN Automatic door type utensil washer with a timed wash-and-rinse cycle. Fully automatic operation with power on/off button. CA-3 capacity is 25- 24” X 28” racks per hour, or 150 bun pans/hr or 100 steam table (2” thick) pans/hr. DA-3 capacity is 50 - 24” X 28” racks per hour, or 276 bun pans/hr or 184 steam table (2”...
  • Page 2 All working parts mounted as an assembly and removable as a unit without disturbing pump housing. CA-3 has one 5 HP motor. DA-3 has two 5 HP motors. Motors are standard horizontal C-face frame, drip proof, internally cooled with ball-bearing construction.

This manual is also suitable for:

Da-3