Advertisement
1.
Place STENCIL in desired location as shown below left and paint. Repeat 1-2 more times
to achieve desired vividness, drying after each application. Remove STENCIL. The
painted image should appear as shown below right.
2.
To paint additional lengths of this set first, ensure STENCIL and pavement is completely
dry before next steps. Flip and rotate STENCIL and place over painted pavement to
align as shown below left and paint.
vividness, drying after each application. Remove STENCIL. The painted image should
appear as shown below right.
© 2018 FIT AND FUN PLAYSCAPES, LLC
APPLICATION INSTRUCTIONS
TIPTOE
Product Number: 18-1W-077
SIZE: approximately 3 feet 6 inches wide, length can
vary
ESTIMATED PAINT TIME: 1-2 people for less than 1 hour
READ FIRST: Completely read "General Instructions ".
Prepare surfaces as recommended before painting.
Repeat 1-2 more times to achieve desired
1 of 2
Advertisement
Table of Contents
Related Manuals for Fit&Fun TIPTOE
Summary of Contents for Fit&Fun TIPTOE
- Page 1 APPLICATION INSTRUCTIONS TIPTOE Product Number: 18-1W-077 SIZE: approximately 3 feet 6 inches wide, length can vary ESTIMATED PAINT TIME: 1-2 people for less than 1 hour READ FIRST: Completely read “General Instructions ”. Prepare surfaces as recommended before painting. Place STENCIL in desired location as shown below left and paint. Repeat 1-2 more times to achieve desired vividness, drying after each application.
- Page 2 Create longer circuits by continuing to flip and rotate stencils as described above. Let completely dry, approximately 24 hours, before use. Any questions? We’re here to help – call us at (800) 681-0684! THIS INFORMATION IS COPYRIGHT MATERIAL. ALL RIGHTS ARE RESERVED. ©...
Need help?
Do you have a question about the TIPTOE and is the answer not in the manual?
Questions and answers