Page 1
ST 5095 FRACTION ACTIONZ APPLICATION INSTRUCTIONS SIZE approx. 14 feet 5 inches wide x 14 feet long PAINTERS & TIME 2-4 painters for 3-6 hrs INCLUDED IN THE BOX: 5 Stencil Sheets (multiple pop outs & inserts)
Page 2
BEFORE YOU START PAINTING: Please completely read the General Instructions & prepare your surfaces as recommended. STEP 1: Pop out the border pieces from STENCIL A and d iscard them (refer to discard symbol on stencil). STEP 2: Place STENCIL A in your desired location. Paint STENCIL A .
Page 3
STEP 4: Pop out the border pieces from STENCIL C . iscard the border pieces (refer to discard symbol on stencil). Align the border from STENCIL C to the edge of the dry painted pavement. Paint STENCIL C . Repeat 1-2 more times to achieve desired vividness, drying after each application.
Page 4
STEP 7: Make sure the painted pavement is completely dry before you continue on. Flip and align the border from STENCIL C to the edge of the dry painted pavement. Paint STENCIL C . Repeat 1-2 more times to achieve desired vividness, drying after each application.
Page 5
STEP 10: Flip and align the border from STENCIL B to the edge of the dry painted pavement. Paint STENCIL B . Repeat 1-2 more times to achieve desired vividness, drying after each application. Then remove STENCIL B . Fill in the gaps so your STENCIL is complete.
Page 6
TO PAINT THE SECOND LAYER: First pop out the fraction pieces from the last stencil sheet and collect all the fraction pieces from the other stencil sheets. Place the fraction inserts over the dry painted areas. Paint each fraction. Repeat 1-2 more times to achieve desired vividness, drying after each application.
Page 7
CONGRATULATIONS!!! YOU FINISHED FRACTION ACTIONZ YOU DID IT! GIVE YOURSELVES A PAT ON THE BACK! Your finished Fraction Actionz should look like the image below. Have any questions? We’re here to help – call us at (800) 681-0684! VISIT OUR WEBSITE AT WWW.FITANDFUNPLAYSCAPES.COM THIS INFORMATION IS COPYRIGHT MATERIAL.
Need help?
Do you have a question about the ST 5095 and is the answer not in the manual?
Questions and answers