Download Print this page

Target Furniture CUBO CUB-CU164-FP Manual

Advertisement

Quick Links

Congratulations on the purchase of your CUBO unit.
Make life simple with the ultra-versatile Cubo collection. Display, store, divide spaces, and more with this multi-
functional range.
Solidly built with a unique interlocking design for rigidity, the Cubo collection has a clever open back panel so it can
be placed against a wall or freestanding as a smart room feature. Cubo stands out from the crowd with several other
smart features – a small removable glide foot makes transportation and cleaning easier, and the matching felt
storage boxes are made to fit neatly into the cavities for simple storage. With a 10 year guarantee it's a popular style
for good reason, so make a solid choice in Cubo. The felt storage boxes are a generous size, measuring 350 x 350 x
350mm, and are available in grey, orange, green, pink, yellow, blue, red, black and white.
If you have any questions please email
WHERE TO ASSEMBLE YOUR CUBO UNIT
Assemble your CUBO on a clean and smooth surface, free of anything which may damage the finished surfaces. A
clean, carpeted floor is ideal. If assembling on a workbench or table we suggest you cover it with the carton the unit
was packaged in.
Warning! Never leave hardware parts where children can reach them. Small parts may be a choking hazard!
Do not allow children to climb on the unit as this can cause the unit to tip. Compac Furniture can take no
responsibility for damage or injury caused by climbing, sitting, or standing on the unit in any way.
TOOLS REQUIRED:
Size 2 Pozi-screwdriver or simple battery screwdriver.
Hammer
The Cubo Collection carries a 10 year guarantee against defective material or workmanship, excluding misuse and
normal wear and tear. Obviously, as this unit is customer-assembled we cannot guarantee cabinet failure or damage
from incorrect assembly. All claims need proof of purchase – to ensure this register your CUBO unit at
www.platform10.co.nz.
Follow the assembly instructions carefully and take note of the precautions below.
Avoid direct sunlight wherever possible.
Keep cabinet in a dry place.
Wipe off spilt liquids immediately.
Avoid placing hot items directly on the surface.
To clean, wipe with a clean, slightly damp cloth and buff dry with a soft dry cloth - microfibre is
ideal.
Do not allow nail polish, removers, deodorant or other damaging chemicals to come into contact
with the surface.
Job No: 153056
info@platform10.co.nz
or call 0800 7 10 10 10.
10 YEAR GUARANTEE

Advertisement

loading

Summary of Contents for Target Furniture CUBO CUB-CU164-FP

  • Page 1 Congratulations on the purchase of your CUBO unit. Make life simple with the ultra-versatile Cubo collection. Display, store, divide spaces, and more with this multi- functional range. Solidly built with a unique interlocking design for rigidity, the Cubo collection has a clever open back panel so it can be placed against a wall or freestanding as a smart room feature.
  • Page 2: Parts List

    CUBO CUB-CU164-FP Shelving Unit PARTS LIST Please check you have all the necessary parts before beginning to assemble your Shelving Unit. If any parts are missing or damaged please contact the manufacturers directly, either via www.platform10.co.nz or 0800 7101010. PART...
  • Page 3 CUBO CUB-CU164-FP Shelving Unit STEP ONE: Install Hardware in TOP and BASE • Lay the TOP and the BASE on a clean clear surface with the holes facing UPWARDS. • Install four H1 CONNECTING BOLTS in the holes in the TOP and the BASE as shown below. These two parts are identical, so you don’t need to worry about mixing them up.
  • Page 4 CUBO CUB-CU164-FP Shelving Unit STEP THREE: Install Hardware in the SHELVES • Take the SHELVES and lay them with the holes facing UPWARDS. • Install four H2 CAMS in each Shelf as shown below. Ensure that the arrow on the top of each Cam points to the edge of the Shelf nearest it.
  • Page 5 CUBO CUB-CU164-FP Shelving Unit Now we can put it all together……………………. STEP FIVE: Attach SHELVES to an END • Take an END and a SHELF (Note, all shelves are identical). • Connect the H1 CONNECTING BOLTS installed in the End to the H2 Cams installed in the Shelf as shown below.
  • Page 6 CUBO CUB-CU164-FP Shelving Unit STEP SEVEN: Attach the Top and Base • Take the TOP and the BASE • Connect the H1 CONNECTING BOLTS installed in the Top and Base to the H2 CAMS installed in the Shelf as shown below.
  • Page 7 CUBO CUB-CU164-FP Shelving Unit STEP NINE: Attach Back Panel • Your CUBO Unit has one BACK PANEL that can be added for extra stability. This can be placed at the back of any of the outside corner cubes on your Shelving unit. Once you have decided in which Cube to place the Back Panel, screw the H34 RAFIX BOLTS into the four holes in the Cube as shown below.