Advertisement
Insignia-PY-2E10-Car Amplifier.fm Page 5 Tuesday, May 3, 2005 2:19 PM
PY-2E10 Car Power Amplifier
Electrical connections
A
Item
Name
A
POWER/
BATTERY
B
FUSE
C
SPEAKER/
BRIDGED
B
C
Function or Control
• +12 Volts - Connect to positive (+) battery
terminal.
• REM - Connect to the Remote cable from the
signal source to control amplifier switching.
Applied voltage must be between 7 and
15VDC.
• GND - Connect to good ground, such as the
car frame or grounded metal body. Keep
ground cable length as short as possible.
Amplifier protection fuse. Replace with the same
type and capacity.
Connect the speakers to these terminals.
www.insignia-products.com
5
Advertisement
