Advertisement
8.
Select the number of devices to be programmed
under the Quantity field.
Place the first device in the socket
on site 1.
Click the Program button.
Press the Start button if quantity field is
set greater than one.
9.
Insert device into socket card.
Click OK to program device.
10.
After the green Pass or red Fail LED is lit,
place a device in either site and press the
Start button on the programmer.
15000 Northwest Freway, Houston, Texas 77040 USA T: 800.225.2102 /
713.688.4600 / F: 713.688.0920 / www.bpmmicro.com
2022 BPM Microsystems
2800 Series Device Programmer
(8)
(9)
(10)
QSG_FS_0107 REVE
Advertisement
