Advertisement
12.
Refer to on- screen information to verify driver installation
13.
IMPORTANT!
will launch for each individual programming site.
Y ou must repeat a USB driver install for each programming
site. O nce the USB drivers are installed, the PC will
recogniz e that the site(s) are connected at a later time.
If a different USB port on the PC is used, the
F ound N ew H ardware W iz ard will launch and install new
USB drivers.
14.
After Windows has completed the USB driver installation,
Click F inish.
15.
Verify that all USB drivers are loaded correctly,
recogniz ed by Windows and attached. The programmer
sites will be listed in W indows D ev ice M anager. Y ou
can open the Device Manager in Windows with the
W indows+ B reak keyboard combination. Click the
H ardware selection. Expand the B PM
There should be a BPM Microsystems programmer site for
each programmer site attached and turned on.
2800 Series Device Programmer
the F ound N ew H ardware W iz ard
M icrosystems node.
(12)
(13)
(14)
(15)
Advertisement
