* The water is discharged through the hole in the bottom of the
cylinder.
* To reassemble the piston, get the hydraulic cylinder in upper
position, and oil the piston seal.
7 Maintenance
Regularly, the piston in the down position, check the oil level in
the tank with gauge. Adjust the level if necessary.
8 Accessories
1 foot pedal and two pointed screws with six key
sections
1 key screwdriver (piston removal)
1 clamping ring
Cornet No.1 stainless steel
Cornet No.2 stainless steel
Cornet No.3 stainless steel
Inner diameter 12 mm
Outer diameter 14 mm
Length 230 mm
Inner diameter 20 mm
Outer diameter 22 mm
Length 236 mm
Inner diameter 28 mm
Outer diameter 30 mm
Length 236 mm
7