Page 2
(face fix method) (rear fix method) Figure 1. *Image used for illustration purposes only. 2.1 Remove fixing plate from the pull handle by 3.1 Drill a small pilot hole through the centre fixing point loosening top and bottom grub screws. marked in step 1.1 2.
Page 3
Not Included PLEASE NOTE: 8. Secure-fix Rear Plate Cover Not Included: The screws provided with Bankston products are made from solid brass. This allows finishes to be matched as closely as possible 7. Fixing Screws 4. Hex Key and prevents the possibility of screws rusting in coastal areas.