Page 1
Install Instructions Plate Euro Set Scan for AU Warranty Scan for NZ Warranty Scan for Product & Finish Care Information *Image used for illustration purposes only. Contact Us Southern Design Group Australia 14 - 16 Stepney Street, New Zealand Stepney, South Australia 5069...
Page 2
1. Marking the Door 5. Install Levers 5.1. Place the split spindles into the lock body from 1. Marking the Door either side of the door*. 1.1. Mark the edge of your door at the 1.1. Mark the edge of your door at the desired height desired height of your handle.
Page 3
Paint / finish door. Reinstall hardware. PLEASE NOTE: The screws provided with Bankston products are made from solid brass. This allows finishes to be matched as closely as possible and prevents the possibility of screws Please recycle me after use rusting in coastal areas.