Download Print this page

LAWSON PHILIPS OutStanding Screens OSS Drive-in 16 Owner's Manual

Advertisement

Quick Links

Basic Setup
OutStandingScreens™ have
been designed to offer a very
versatile and forgiving setup.
Inside is a simple and direct
method to set up your screen
using stakes in an open area.
CLOSED end
on the pocket
Once you have staked out your best location, the screen itself
goes up with ease. A few tugs here and there and before you know
11'3"
it you are next to a screen standing 11 feet into the air.
Choosing Your Location
slot for
eyebolt
assembly:
The first step is to imagine the possibilities! Sit down in your
audience's place and consider where you want your screen. Every
situation is different. We suggest testing your setup before you
have your first showing. Trying to scramble at the last minute is
never any fun.
Things to Consider
- What throwing distance specs does your projector have?
- How wide or deep of an area do you have to work with?
- What obstructions exist in the planned area?
- Where do you have electricity for projector and stereo?
opening for
- Where can you place speakers and run speaker wire?
pole joint
- Will there be foot traffic or water near your wiring?
- If you don't use stakes, what
anchors*
can you substitute?
slot for
eyebolt
- Where will your audience sit?
assembly
Front or Rear Projection?
If you choose rear projection, a low-angle projector aiming upward
4'6"
is best. Think of your projector as a flashlight. If you aim the
flashlight into the audience's eyes, they will see the light source.
If you put the flashlight low, angled upward, then the "flashlight" is
aimed above your audience's head. Test your arrangement before
3'3"
movie night arrives!
* Alternate anchor points can be used, but they should be permanent
in nature. Go to the website for more detailed care and safety
2'1"
information.
OPEN end
on the
pocket
white vinyl tip
Satisfaction Guaranteed
OutStandingScreens™ are made of high-quality materials built to last
for years with reasonable care. The screen material is fire retardant,
mold and mildew resistant, stain resistant, and machine washable.
eye bolt
The ropes and case are color-fast and very durable. Aluminum
assembly
poles and stainless steel hardware are suitable for outdoor use.
OutStandingScreens™ are not intended for permanent installation.
If you are not satisfied with your screen, just return it within 45
days of purchase, and we will refund your money. If you have other
questions or need parts, contact us and we will work to keep you
a satisfied customer.
Visit OutStandingScreeens.com anytime for
more information!
adjustable
tension
dowel
OSS Projection 12
finished screen size: 12' x 6'9" (144" x 81")
I'm
5'8"
OSS Cinema 14
tall.
finished screen size: 14' x 7'10" (168" x 94.5")
OSS Drive-In 16
finished screen size: 16' x 9' (192" x 108")
11" ground
stakes
black rubber
foot
165"
diagonal
192"
diagonal
220"
diagonal
O
S
ut
tanding
S
creens
.com
a division of lawson phillips llc
patent pending
The fun begins when the
sun goes down!!
Congratulations on your purchase of one of the following screen sizes:
OSS Drive-in 16' (16' x 9')
OSS Cinema 14' (14' x 7'10.5")
What you need for set-up.
- a 30-foot tape measure or string long enough to measure that distance, depending
on how far your projector can project an image. (See projector specifications.)
- a mallet or hammer to drive in the stakes
(orange dots in illustrations).
- temporary markers for the pole ends. As you lay out your planned location, it helps to
(green dots in illustrations).
indicate each end of the screen
All OutStandingScreens™ come with the following assembled parts:
1 - screen
4 - cord assemblies
1 - 72" OSS carrying case
2 - 26' parachute cords
8 - 11" ground stakes
2 - 34' parachute cords
1 - owner's manual
8 - fluted dowels
total weight is
less than 20 lbs
OutStandingScreens™.com
4021
10th Street, No. 324
SW
Topeka, Kansas 66604
: 785.409.8600
phone
Owner's Manual
Made in USA
OSS Projection 12' (12' x 6' 9")
2 - pole assemblies
4 - pole segments
(2 tapered, 2 straight)
2 - rubber feet
2 - vinyl tips
4 - stainless steel eyebolts
4 - stainless steel nuts
4 - screw posts
4 - rubber washers
4 - sealing washers

Advertisement

loading
Need help?

Need help?

Do you have a question about the OutStanding Screens OSS Drive-in 16 and is the answer not in the manual?

Questions and answers

Summary of Contents for LAWSON PHILIPS OutStanding Screens OSS Drive-in 16

  • Page 1 ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ tanding ✴ OutStandingScreens™.com creens Basic Setup ™ .com 4021 10th Street, No. 324 Topeka, Kansas 66604 OutStandingScreens™ have : 785.409.8600 phone been designed to offer a very a division of lawson phillips llc...
  • Page 2 tanding creens™ Visit us online for more information about setting up an outdoor theater! Made in USA .com stakes stakes 1. Lay out screen stake positions 3. Adjust to straight. pole 1. Mark the center point of your screen. 3. Place your stakes. 1.

This manual is also suitable for:

Outstanding screens oss cinema 14Outstanding screens oss projection 12