Table of Contents
Advertisement
Quick Links
✴
✴
✴
✴
O
S
ut
✴
S
creens
The fun begins when the
sun goes down!!
Congratulations on your purchase of one of the following screen sizes:
OSS Drive-in 16' (16' x 9')
What you need for set-up.
- a 30-foot tape measure or string long enough to measure that distance, depending
on how far your projector can project an image. (See projector specifications.)
- a mallet or hammer to drive in the stakes
- temporary markers for the pole ends. As you lay out your planned location, it helps to
indicate each end of the screen
All OutStandingScreens™ come with the following assembled parts:
1 - screen
1 - 72" OSS carrying case
8 - 11" ground stakes
1 - owner's manual
✴
✴
✴
✴
✴
tanding
™
.com
a division of lawson phillips llc
patent pending
OSS Cinema 14' (14' x 7'10.5")
(green dots in illustrations).
4 - cord assemblies
✴
OutStandingScreens™.com
4021
Topeka, Kansas 66604
phone
(orange dots in illustrations).
2 - 26' parachute cords
2 - 34' parachute cords
8 - fluted dowels
total weight is
less than 20 lbs
✴
✴
10th Street, No. 324
SW
: 785.409.8600
Owner's Manual
Made in USA
OSS Projection 12' (12' x 6' 9")
2 - pole assemblies
4 - pole segments
(2 tapered, 2 straight)
2 - rubber feet
2 - vinyl tips
4 - stainless steel eyebolts
4 - stainless steel nuts
4 - screw posts
4 - rubber washers
4 - sealing washers
✴
✴
✴
✴
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LAWSON PHILIPS OutStanding Screens OSS Drive-in 16
Summary of Contents for LAWSON PHILIPS OutStanding Screens OSS Drive-in 16
- Page 1 ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ ✴ tanding ✴ OutStandingScreens™.com creens ™ .com 4021 10th Street, No. 324 Topeka, Kansas 66604 : 785.409.8600 phone a division of lawson phillips llc patent pending The fun begins when the Owner’s Manual sun goes down!!
- Page 2 Basic Setup OutStandingScreens™ have been designed to offer a very versatile and forgiving setup. Inside is a simple and direct method to set up your screen using stakes in an open area. CLOSED end on the pocket Once you have staked out your best location, the screen itself white vinyl tip goes up with ease.
- Page 3 tanding creens™ .com 1. Lay out screen stake positions 3. Place your stakes. 1. Mark the center point of your screen. The stakes (orange dots) are placed 8 feet out from the Measure and place a marker at the distance the screen needs dots) at 45° angles off the pole base locations (green to be from your projector (see projector specifications). (green dots). 2. Mark the ends of your screen ends of the screen. The stakes should be driven at an angle away from the rope tension (see illustration). The screen should squarely “face” the projector. Everything is square when the measurements (“A” and “B”) from the dots) to the projector are the same.
- Page 4 Visit us online for more information about setting up an outdoor theater! stakes stakes pole locations bottom ropes screen top ropes 2. Stand the screen The dowels easily slide up and down the rope 1. Lay the screen out and connect the poles. to create tension.
- Page 5 Made in USA 3. Adjust to straight. 1. Tension all ropes. Continue to adjust all ropes incrementally until the poles stand straight up and down and the tension on all ropes is about the same. Hint: it helps to stand back and look at your progress. You will also adjust the location of the feet as they have likely moved a little from your “green spots.” Incorrect Incorrect Correct...
- Page 6 Satisfaction Guaranteed OutStandingScreens™ are made of high-quality materials built to last for years with reasonable care. The screen material is fire retardant, mold and mildew resistant, stain resistant, and machine washable. The ropes and case are color-fast and very durable. Aluminum poles and stainless steel hardware are suitable for outdoor use.
Need help?
Do you have a question about the OutStanding Screens OSS Drive-in 16 and is the answer not in the manual?
Questions and answers