Easy Installation & Operation; What’s In The Box - New Wave Enviro 10 Stage Plus Water Filter Quick Manual

What's in The Box
Filter Housing Unit,
and 10 Stage Plus Cartridge Inside
O
RING
10 Stage Plus
Cartridge
Top of Base
Housing
Elbow
Hose
Diverter
Valve
13/16' Adapter
Easy Installation & Operation
• Unscrew and remove your existing strainer
/aerator from the end of your kitchen faucet
(standard thread loosens to the left or
counter clockwise).
Screw diverter valve, 15 / 16" female
threads on to faucet. Also included is a 13
/16" male thread adapter one of the two
"threads" can fit your standard faucet.
Fits Standard Faucets
Stabilizer
Ring
• After you complete the above steps, turn
water ON and PULL the PIN on diverter
valve to divert the water to the filter.
• The first use of your new filter may take a
minute or two while the canister pulls up with
water before it passes through the cartridge
and out the spigot.
X Designer Faucets, Sprayer Faucets,
Pull-out Spray Faucets
• Allow water to run through the unit
and out the filter spout for 2 to 3
minutes first timeonly . This process
allows for loose "carbon fines" to be
washed out.
• If leaking occurs from any point of
the housing unit, it will need to be
hand tightened at the point of leakage.
• The pin on the diverter valve is
spring loaded and will automatically
return on its own when the water flow
is terminated.
: This could
(DO NOT PUSH PIN IN)
weaken the spring and cause the pin
to lose its mobility. When you turn your
water back on, it will come through
your faucet as normal again.