Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for amber connect AMB375
Summary of Contents for amber connect AMB375
- Page 2 1. Characteristic MODULE Name AMB375 Technology GSM/GPRS/GNSS/BLUETOOT GNSS GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, GNSS AGPS Receiver 33 channel Tracking sensitivity -165 dBM Accuracy < 3 m Hot start < 1 s Warm start < 25 s Cold start <...
- Page 3 Digital Outputs Analog Inputs CAN Adapter inputs 1-Wire GNSS antenna Internal High Gain GSM antenna Internal High Gain 2.0 Micro-USB LED indication 2 status LED lights Memory 128MB internal flash memory PHYSICAL SPECIFICATION Dimensions 65 x 56,6 x 20,6 mm (L x W x H) Weight 55 g OPERATING ENVIRONMENT...
- Page 4 ACCESSORIES Bluetooth and analog fuel sensor RFID reader Temperature sensor • Bluetooth fuel sensor • Analog fuel sensor • RFID reader • Wired temperature sensor...
- Page 5 Electrical characteristics VALUE CHARACTERISTIC DESCRIPTION MIN. TYP. MAX. UNIT SUPPLY VOLTAGE Supply Voltage (Recommended Operating Conditions) DIGITAL OUTPUT (OPEN DRAINGRADE) Drain current (Digital Output OFF) µA Drain current (Digital Output ON, Recommended Operating Conditions) Static Drain-Source resistance (Digital Output mΩ DIGITAL INPUT kΩ...
- Page 6 3. Pinout PIN NAME DESCRIPTION NUMBER VCC (10-30) V DC (+) Power supply (+10-30 V DC). Analog input, channel 1. Input range: AIN 1 0-30 V DC. Analog input, channel 2. Input range: 0-30 V DC / AIN 2 / DIN 3 Digital input, channel 3.
-
Page 7: Wiring Scheme
Accessories Connection Possibilities • 4 IN ports/pin o 2 Digital o 1 Analog o 1 Digital or Analog • 2 OUT ports/pins o 2 Digital (for future use) • 1 One-wire connection Installation team must follow the below Accessory connection for efficient working. If installation has to be done with different patterns then please contact your immediate tech support for the possibilities. -
Page 8: Mounting Recommendations
4. Mounting Recommendations 1) Connecting wires a) Wires should be connected while the module is not plugged in. b) Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires. c) There should be no exposed wires. - Page 9 5. LED Indications BEHAVIOUR MEANING Permanently switched on GNSS signal is not received Blinking every second Normal mode, GNSS is working GNSS is turned off because: Device is not working or Device is in Sleep mode Blinking fast constantly Device firmware is being flashed BEHAVIOUR MEANING Blinking every second...
-
Page 10: Certification And Approvals
Installation and/or handling during a lightning storm is prohibited. The device is susceptible to water and humidity. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores.
Need help?
Do you have a question about the AMB375 and is the answer not in the manual?
Questions and answers