amber connect ACC400-E/LA Quick Start Manual
  1. Manuals
  2. Brands
  3. amber connect Manuals
  4. GPS
  5. ACC400-E/LA
  6. Quick start manual

amber connect ACC400-E/LA Quick Start Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACC400-E/LA and is the answer not in the manual?

Questions and answers

Related Manuals for amber connect ACC400-E/LA

Summary of Contents for amber connect ACC400-E/LA

  • Page 2: Product Overview

    Product overview Position tracking  LTE, UMTS& GSM connectivity  GPS & LBS positioning  Real-time location query  Track by time/distance/cornering/ignition Anti-theft  Remote power/Fuel cut-off  SOS emergency call  Geo-fence alert  Towing alert Monitoring  Ignition detection ...

  • Page 3: Product Setup

    Cold start: <45s Warm start: <35s Sensitivity Hot start: <1s 2.5m CEP Position Accuracy General Specifications LED Indicator GPS (blue), GSM(green), power (red) 450mAh/3. 7V Battery 12VDC/24VDC Working Voltage -20"C~ 70"C Operating Temperature 105g Weight 113(L)'51 (W)'20(H)mm Dimension Product setup Insert SIM and Power on 1.
  • Page 4 Searching signal ( over 1 min in this state On for 0.3s and off for 0.3s please move to open ground) Positioning success On for 0.1 s and off for 3s Low power (<3.65V) Solid on GSM Status (Green) Initializing On for 0.3s and off for 0.3s Logining (If long-stay in this stale, please On for 1 s and off for 3s...
  • Page 5 Power connection The standard power supply ranges from 11V to 36VDC. During installation, negative side should connect to the ground. Do not connect with other ground wires simultaneously. Ignition wire ACC line (orange} connects to vehicle's ACC, detecting ignition. Be sure to check if it's a real ignition wire i.e. power does not disappear after starting the engine.

  • Page 6: Installation Recommendation

    Relay wiring Relay's white line (85) connects to the positive side of battery (12V} while the yellow line (86) connects to the device relay control (yellow line on the power cord}. Find the fuel pump in the vehicle and cut off its positive power line. The positive side of fuel pump connects to the green line (87a} while the side closing to starter motor connects to green line (30) , as the below chart.

  • Page 7: Troubleshooting

    1) The device should face up to the sky. 2) Metal thermal barrier or healing layer of the windshield affects the signal. Troubleshooting Type Check the APN and IP settings. Check whether the data service of SIM card is Unable to connect to tracking platform enabled.

Table of Contents