oneup 1000 User Manual
  1. Manuals
  2. Brands
  3. oneup Manuals
  4. Portable Generator
  5. 1000
  6. User manual

oneup 1000 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Contact us:
support@oneuppower.com
ONEUP 1000 | User Manual
WARNING
1. Keep ONEUP 1000 and the accessories dry and do not expose
them to high heat.
2. Never disassemble, puncture, shock, crash, or incinerate
the product or the accessories.
3. Recycle and dispose of ONEUP 1000 in accordance with the
local regulations.
4. Pay attention to safety when handling the ONEUP 1000.
5. People with disabilities or children should use the machine
under the protection of the supervisor.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for oneup 1000

Summary of Contents for oneup 1000

  • Page 1 ONEUP 1000 | User Manual 1. Keep ONEUP 1000 and the accessories dry and do not expose them to high heat. 2. Never disassemble, puncture, shock, crash, or incinerate the product or the accessories. 3. Recycle and dispose of ONEUP 1000 in accordance with the local regulations.
  • Page 2 Product use: 1. Do not expose ONEUP 1000 to any liquid. Keep the ONEUP 1000 away from rain or any liquid. Do not drop the ONEUP 1000 into the water. If the battery in the ONEUP 1000 comes into contact with water, it may cause chemical decomposition of the battery.
  • Page 3 WARNING Product Charging: 1. Always use ONEUP approved charging cables. ONEUP takes no responsibility for any damage caused by using non-ONEUP charging cable. 2. When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine unattended during charging.
  • Page 4 1. Never store the product in environments below -20°C or above 45°C. 2. Battery life may be reduced if not used for a long time. 3. Discharge ONEUP 1000 to 30%, then charge to 85% every 3 month to maintain battery health. Travel Notice: It is forbidden to carry lithium batteries above a specific capacity on airplanes due to flight regulations.

  • Page 5: Table Of Contents

    CONTENTS ONEUP 1000 USE CARE AND SAFETY GUIDE FEATURES of ONEUP 1000 LCD DISPLAY SOLAR PANEL CONNECTION ENTRY-LEVEL UPS AND SERIES MODE TECHNICAL SPECIFICATIONS HOW TO RECHARGE ONEUP 1000 FAQs WHAT’S IN THE BOX...

  • Page 6: Oneup 1000 Use Care And Safety Guide

    Everything you need to know about recharging your ONEUP 1000 via AC Cable, car charge cable or solar charge cable (If applicable). FAQs: Answers to you some of the most important questions about how to take care of your ONEUP 1000, store your ONEUP 1000, and safely use your ONEUP 1000. What’s in the Box: What include in your ONEUP 1000 purchase.

  • Page 7: Features Of Oneup 1000

    FEATURES OF ONEUP 1000 1. LCD Display 2. USB-A Output Ports 3. USB-C Output Port 4. DC ON/OFF Switch (PRESS & HOLD to switch ON/OFF) DC Output Indicator 5. Fast Charge USB-A Output Ports 6. Power ON/OFF Button 7. AC ON/OFF Switch (PRESS &...
  • Page 8 AC power. Make sure to unplug the power cord from the AC port. When the AC power of the ONEUP 1000 is enabled, the AC indicator will light up. If the AC power is not used for more than 12 hours, the product will turn off automatically.

  • Page 9: Lcd Display

    AC power source. Please note that U.S. version only support chargings in 100-120Vac (50/60Hz). User can use the ONEUP 1000 AC socket while the device is connected to a wall socket with AC power supply (the AC power comes from the grid, not the battery).
  • Page 10 High Temperature Indicator When the temperature of the ONEUP 1000 is too high, a high-temperature warning icon appears on the screen to warn that the temperature of the product is too high. Please cool down the product before use it again .
  • Page 11 Exclamation and Low-Temperature icons flash together. Low Temperature Place ONEUP 1000 in a warmer place and wait for it Discharge-protection back to its working temperature before recharging it. RECHARGING TIME, Exclamation and OVERLOAD icons Overload flash together.
  • Page 12 Temperature Protection operation. The AC and Low-Temperature icons flash together. Inverter Low Move ONEUP 1000 to a warmer place and wait for the Temperature Protection inverter to warm up. AC and Fan icon flashes. Turn off ONEUP 1000 and carefully clean and vacuum around vents on both Fan Blockage sides.

  • Page 13: Solar Panel Connection

    6 solar panels, you can put them into 2 sets of 3 solar panels connected in series and then connect the 2 sets of solar panels in parallel. Connect them with our MC4 to XT60 conversion cable and connect XT60 cable to the ONEUP 1000’s XT60 input to charge the device.

  • Page 14: Entry-Level Ups And Series Mode

    When ONEUP 1000 has UPS or series mode on, ONEUP 1000's system supports an entry-level UPS function. You can use the ONEUP 1000 AC socket while the device is connected to a wall socket with AC power supply (The AC power comes from the grid, not the battery).
  • Page 15 ONEUP 1000 at the same time. Otherwise, the excessive load may cause damage to the home power grid. To use this function, you need to set one ONEUP 1000 as the Master and the others as Serve 1. Connect one AC cable to the AC output port of the master unit and the other side to the input port of Serve 1.

  • Page 16: Technical Specifications

    Example: 100% 100% Master unit AC on Serve unit AC on TECHNICAL SPECIFICATIONS General Specs Net Weight 30.9lbs (14kg) Dimension 12.7 x 8.3 x 12.2 in (32.3 x 21.0 x 31.1 cm) Capacity 1008Wh (50.4V) Testing and certification RoHS UN38.3 Output AC Output (x6) 1600W (Surge 3000W)total, 120Vac, 60Hz...

  • Page 17: How To Recharge Oneup 1000

    How do I recharge my ONEUP 1000? ONEUP 1000 has an AC charging port and a XT60 charging port located on the side of ONEUP 1000. ONEUP 1000 can be charged through AC power or solar panel. Besides, you can also use solar panels connect in series (no more than three) and connect the solar charge cable to the XT60 solar charging port of ONEUP 1000 for charging.

  • Page 18: What's In The Box

    ONEUP 1000 in room temperature. Discharge ONEUP 1000 to 30%, then charge to 85% every 3 month. This can help prolong the battery life and ensure your ONEUP 1000 is ready to recharge the gears at all times. Without any external sources for power supply during storage, ONEUP 1000 has a shelf life of over a year.

Table of Contents

Save PDF