Infinity Reference 1300A Instructions Manual
Reference series
Hide thumbs
Also See for Reference 1300A:
- Reference (3 pages) ,
- Service manual (18 pages) ,
- Instructions manual (10 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Infinity Reference 1300A
Summary of Contents for Infinity Reference 1300A
- Page 1 475a ,5350a , 1300a ,1600a reference series...
- Page 2 Infinity accepts no liability for hearing loss, of backseat passengers. Make sure that the bodily injury or property damage resulting from amplifier is mounted securely using nuts and the use or misuse of this product.
- Page 3 Subwoofers or voice coils connected in series. Subwoofers or voice coils connected in parallel. reference series Figure 3. Reference 1300a or 1600a amplifier with two woofer connections. NOTE: Minimum impedance of each subwoofer = 4 ohms if subwoofers are connected in parallel and 1 ohm if they are connected in series.
- Page 4 – 475a PPLICATIONS The 475a can be set up for stereo 4-channel, 3-channel or bridged 2-channel operation, as shown in Figures 5 through 8. NOTE: • Minimum speaker impedance for stereo operation is 2 ohms. Minimum speaker impedance for bridged operation is 4 ohms. •...
- Page 5 – 475a PPLICATIONS reference series To Head Unit Sub Output Figure 7. 475a connected in tri-mode to a subwoofer and a pair of satellite speakers. Note crossover and channel assignment settings. To Head Unit Front Output Front Speakers Subwoofer To Head Unit Right Figure 8.
-
Page 6: Input Mode Switch
– 5350a PPLICATIONS The 5350a can be configured for 5-channel or To Head Unit Front 3-channel operation, as shown in Figures 9 and 10. INPUT MODE SWITCH: • Use INT (internal mode) to send a signal from the front and rear inputs to the subwoofer. •... -
Page 7: Troubleshooting
NSTALLATION AND ETUP Refer to the illustrations on the previous pages SETTING INPUT SENSITIVITY for control location. 1. Initially turn the INPUT LEVEL control(s) to the minimum (counterclockwise) position. Reconnect the (–) negative lead to the vehicle’s 2. On the source unit, increase the volume battery. -
Page 8: Specifications
© 2007 Harman International Industries, Incorporated. All rights reserved. Part No. REFAMPOM1/07 Infinity is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. 5350a • 50W RMS x 4 channels plus 150W RMS x 1 channel at 4 ohms and ≤1% THD + N •...