Table of Contents
Advertisement
STOPPING
Take the plug out of the socket and take the pump out
of the pump site. If the pump has been operating in
dirty water, allow it to run in clean water for a short
period or flush clean water through the discharge port.
If clay, cement or other sticky dirt remain in the pump
this may clog the impeller and seal area.
STORAGE
If the pump is stored more than six months the seal
must be inspected to ensure that it is not stuck before
operation.
To avoid the seal getting stuck it is
recommended to rotate the impeller
every other month.
The pump must be stored in a cov-
ered and dry location free from heat,
dirt and vibrations.
12
Advertisement
Table of Contents
