Advertisement
4. Fixing the centre support pole
The support pole should be positioned centrally under
the shelf. To ensure the pilot hole for the top support
pole bracket is positioned correctly, use the paper
drilling template supplied – see diagram 3 to help you.
TIP
For the top bracket, on the underside of the shelf,
you may wish to mark the position for the pilot
hole first with a bradawl, remove the template and
then drill the hole; rather than drilling the pilot
hole directly through the paper template.
When drilling the pilot hole take care not to drill
completely through the shelf.
Once the pilot hole is drilled, place the support pole in
position, ensuring the U-shaped cup on the top bracket
is facing the front of the wardrobe (this will mean that
the U-shaped cup on the bottom bracket is facing the
back of the wardrobe) and secure in place through the
available hole in the bracket, using a 15mm screw.
Using a spirit level, ensure that the pole is positioned
vertically when viewed from the front and from the
side. Drill a 2mm pilot hole through the hole in the
bottom bracket into the floor of the wardrobe and then
secure the bottom bracket in place using another
15mm screw.
Finally, as described above in (2), secure the shelf to the
shelf bearers using the 30mm screws provided.
3. Drilling template position for support pole bracket
on underside of shelf
Underside of back shelf bearer
Underside
of shelf
Front edge of shelf
(viewed from
underside)
3
Place
against back
shelf bearer on
underside
of shelf
Align
the
dotted line
on the
drilling template
with the
centre line
of the
Position of hanging rail
shelf
Centre line
of shelf
Advertisement
