Download Print this page

Little Kiwi Pikler Arch Assembly Instructions

Download this manual

Little Kiwi Pikler Arch Assembly

Thank you for purchasing the Little Kiwi Pikler Arch! To ensure your little one is as

safe as possible, please follow the safety tips and assembly instructions below.

Safety Tips

Do not overload the arch. The arch has been tested for up to 80kg but a maximum of two

children at any time.

Do not modify the arch or use the arch with missing or damaged components.

Only use the arch on a hard, non-slip, level surface. Take care to ensure all 4 legs are firmly

planted on the ground.

Care Tips

Never leave your arch in areas of high moisture, the arch is not suitable for use outside.

Routinely check to ensure all rungs are secure and do not rotate by hand. If the rung does rotate

and you cannot tighten the screws further, you may glue the rung in in place with a wood glue

such as PVA

Assembly tools required

Electric Drill/Driver.

Phillips head driver bit.

Screwdriver (optional).

Parts included the package

Assembly Instructions – Pikler Arch - Nov 2020 Rev A

Instructions

Page 1 Little Kiwi Pikler Arch Assembly Instructions Thank you for purchasing the Little Kiwi Pikler Arch! To ensure your little one is as safe as possible, please follow the safety tips and assembly instructions below. Safety Tips Do not overload the arch. The arch has been tested for up to 80kg but a maximum of two children at any time.
Page 2 Ensure screws are fastened firmly and as straight as possible into the dowels. Assemble all dowels into one leg first before lining up the pockets on the second leg and driving the screws in. Assembly Instructions – Pikler Arch - Nov 2020 Rev A...
Page 3 If rungs rotate, tighten the screws on each side of the rung with a philips head screwdriver. You may hold the screwdriver in position on the screw and rotate the rung to tighten it, for extra leverage. Assembly Instructions – Pikler Arch - Nov 2020 Rev A...