Related Manuals for MAROOMS BED A
Summary of Contents for MAROOMS BED A
- Page 1 BED CURTAINS - Installation guide BED A - Mid High beds - free height: 75+ cm / Mattress: 160 cm BED A1 - Mid High beds - free height: 75+ cm / Mattress: 200 cm BED A2 - Mid High beds corner - free height: 75+ cm / Mattress: 200 cm...
- Page 2 Welcome and thank you for choosing a part of Marooms universe! This guide helps you install Marooms bed curtains on different kind of beds. IMPORTANT: As these are universal bed curtains, for some beds, the bed curtains will reach the bot- tom of the bed or just to the mattress top.
- Page 3 Content: Step 1. put the clips inside the ring. Step 2. make sure to pull the strings through according to how you want the curtains to hang on your bed. See suggestion on the next page for how to pull the strings.
- Page 4 Step 3: pull the strings through the curtains. BED A: 1. Use the long string to pull through the two printed curtains for the front. 2. Use one of the short strings to pull through each of the two side cur- tains.
- Page 5 Step 3: pull the strings through the curtains. BED A1: for beds with free sides ex. for Mid-High beds length 200 cm. 1. Use the long string to pull through the two printed curtains for the front. 2. Use one of the short strings to pull through each of the two side curtains. Note: if you want a full coverage on the sides, place the bed against a corner and use both side curtains on one side.
- Page 6 Step 3: pull the strings through the curtains. BED A2: for beds placed in a corner ex. for Mid High beds length 200. 1. Use the long string to pull through the two printed curtains for the front. 2. Use one of the short strings to pull through both side curtains. See arrow in black.
- Page 7 Step 4. It is now time to screw the hooks into the bed. To make it easier for screwing the cup screws into the wooden bunk bed, an awl and a hammer is recommanded to make the initial holes for the metal hooks. Screw in the hooks by the legs first.
- Page 8 For Bed A: Screw 7 hooks into the wooden bed as shown with red arrows below. If the ladder is placed on the opposite site, the center hook should be placed 80 cm from the other side. 80 cm Step 5: each string is equipped with a metal ring. Put the ring on the hooks.
- Page 9 BED A1: for beds placed in a corner ex. for Mid High beds length 200. Screw 7 hooks into the wooden bed as shown with red arrows below. If the ladder is placed on the opposite site, the center hook should be placed 80 cm from the other side.
-
Page 10: Maintenance
BED A2: for beds with free sides ex. for Mid-High beds length 200 cm. Screw 5 hooks into the wooden bed as shown with red arrows below. If the ladder is palced on the opposite site, the center hook should be placed 80 cm from the other side.
Need help?
Do you have a question about the BED A and is the answer not in the manual?
Questions and answers