Related Manuals for MAROOMS B
Summary of Contents for MAROOMS B
- Page 1 BED CURTAINS - Installation guide BED B / B 1: ex. Flexa Classic - free height: 75+ cm mattress length 200 cm...
- Page 2 Welcome and thank you for choosing a part of Marooms universe! This guide helps you install Marooms bed curtains on different kind of beds. IMPORTANT: As these are universal bed curtains, for some beds, the bed curtains will reach the bottom of the bed or just to the mattress top.
- Page 3 Content: Step 1. put the clips inside the ring. Step 2. make sure to pull the strings through according to how you want the curtains to hang on your bed. See suggestion on the next page for how to pull the strings.
- Page 4 Step 3: pull the strings through the curtains. BED B: for beds with free sides ex. for Flexa classic. 1. Use the long string to pull through the two printed curtains for the front. 2. Use one of the short strings to pull through each of the two side curtains.
- Page 5 BED B1: for beds placed in a corner ex. for Flexa classic. 1. Use the long string to pull through the two printed curtains for the front. 2. Use one of the short strings to pull through both side curtains. See arrow in black.
- Page 6 Step 4. It is now time to screw the hooks into the bed. To make it easier for screwing the cup screws into the wooden bunk bed, an awl and a hammer is recommanded to make the initial holes for the metal hooks. Screw in the hooks by the legs first.
- Page 7 BED B Screw 7 hooks into the wooden bed as shown with red arrows below. If the ladder is palced on the opposite site, the center hook should be placed 80 cm from the other side. 80 cm BED B1 Screw 5 hooks into the wooden bed as shown with red arrows below.
- Page 8 Step 5: each string is equipped with a metal ring. Put the ring on the hooks. Step 6: tighten the straps on all sides with the regular. Maintenance: if the curtains start to hang more loose, simply tighten the straps to make them hang nicely again.
Need help?
Do you have a question about the B and is the answer not in the manual?
Questions and answers