6 ............... Safety Labels Safety Rules 6 ............... Hazard Symbols and Meanings 7-10 ..............Warning and Precautions Operation 14..............Starting the Machine 15..............Checking and Changing the Oil 15..............General Precautions for Use 16..............Shutting Down the Machine 855.SHOP.DCD l DCDdrain.com...
You will need to locate the model and serial number for the machine and record the information in the places provided below. Product Identification Number Model Number Serial Number Date of Purchase Dealer Name Dealer Phone 855.SHOP.DCD l DCDdrain.com...
Page 4
To reduce risk of injury, read operating instructions carefully before using. Warning - Risk of injection or injury to persons or animals - Do not direct discharge stream at persons or animals. Store Indoors Cold Water Use ONLY 855.SHOP.DCD l DCDdrain.com...
CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. NOTICE indicates a situation that could result in equipment or property damage Hazard Symbols and Meanings 855.SHOP.DCD l DCDdrain.com...
• Be extremely careful if you must use the sewer jetter from a ladder, scaffolding, or any other similar location. • Firmly grasp spray gun with both hands when using high pressure spray to avoid iniury when spray qun kicks back. 855.SHOP.DCD l DCDdrain.com...
Page 7
• Store away from furnaces, stoves, water heaters, clothes dryers, or other appliances that have pilot light or other ignition source because they can ignite fuel vapors. WARNING Risk of electrocution. Contact with power source can cause electric shock or burn. • Never spray near a power source. 855.SHOP.DCD l DCDdrain.com...
Page 8
• DO NOT touch hot parts and AVOID hot exhaust gases. • Allow equipment to cool before touching. • Keep at least 5 feet (1.5 m) of clearance on all sides of sewer jetter including overhead. 855.SHOP.DCD l DCDdrain.com...
Page 9
• NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order. • Always be certain spray gun, nozzles and accessories are correctly attached before spraying water. 855.SHOP.DCD l DCDdrain.com...
Page 10
• NEVER move machine by pulling on hoses. Use the handle provided on units’ frame. Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, and damaged tank or cap. Correct all defects before o eratin sewer jetter. 855.SHOP.DCD l DCDdrain.com...
Page 11
GFCL DO NOT use the jetter if the test fails! The GFCI provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection. 855.SHOP.DCD l DCDdrain.com...
Page 12
7. Ensure the area between the jetter and outlet is kept dry. 8. Insert the male plug into a grounded AC outlet. DO NOT use an adapter OR remove the grounding plug! 855.SHOP.DCD l DCDdrain.com...
Page 13
• NEVER connect high pressure hose directly to nozzle extension. • Keep high pressure hose connected to pump and spray gun while system is pressurized. • Always be certain spray gun, nozzles, and accessories are correctly attached. 855.SHOP.DCD l DCDdrain.com...
Page 14
• Always wear safety goggles when using this equipment or in vicinity of where equipment is in use. • Before starting the pressure washer, be sure you are wearing adequate safety goggles. • NEVER substitute safety goggles with normal glasses. 855.SHOP.DCD l DCDdrain.com...
Page 15
• Keep high pressure hose connected to pump and spray gun while system is pressurized. • ALWAYS point spray hose in safe direction and squeeze spray gun triaaer, to release hiqh pressure, everv time vou stop enqine. 855.SHOP.DCD l DCDdrain.com...
Need help?
Do you have a question about the Valor G Jet and is the answer not in the manual?
Questions and answers